37" tires - do they fit?

[Dalamar]

The whipple will drive the 37's NP

 

[Dalamar]

Ordered some 37x12.5 Ridge Grapplers

 

[John813]

Make sure you have a spare power steering pump with you if you go offroading.

37's + stock PSP = better chance at blowing the pump if you go full lock/hard day off road with turning.

 

[surgknock]

Any pics of trimming an cutting

 

[MrGable27]

I’ve run 37” BFGs on my Gen 1, both on mid perch with stock Fox’s and fenders, and with King 3.0s and fiberglass.

You can run BFG 37’s with stock shocks and fenders, but you’d better be prepared to do some serious trimming and hammer the pinch welds. This will work for 99% of all raptor owners, and you can still take it offroad and have fun. However, if you do any serious/high speed desert running, then you run a decent chance at blowing the stock fender liners out, or that grey outer trim piece off.

If you’re really going to beat the **** out of the truck, then I’d recommend either getting aftermarket fiberglass fenders, or just sticking with a nice set of 35” tires.

 

[MrGable27]

Any pics of trimming an cutting

I can grab some pics of the trimming I had to do if you’re still interested

 

[surgknock]

I can grab some pics of the trimming I had to do if you’re still interested

No other guy sent me some good ones an I trim bottom corner a bit am on top perch upper arms but am going to take off inner plastics an cut an beat pinch weld an I think I’ll be fine thanks again

 

[MrGable27]

No other guy sent me some good ones an I trim bottom corner a bit am on top perch upper arms but am going to take off inner plastics an cut an beat pinch weld an I think I’ll be fine thanks again

no problem, good luck with it!

 

[SJC8713]

I’ve run 37” BFGs on my Gen 1, both on mid perch with stock Fox’s and fenders, and with King 3.0s and fiberglass.

You can run BFG 37’s with stock shocks and fenders, but you’d better be prepared to do some serious trimming and hammer the pinch welds. This will work for 99% of all raptor owners, and you can still take it offroad and have fun. However, if you do any serious/high speed desert running, then you run a decent chance at blowing the stock fender liners out, or that grey outer trim piece off.

If you’re really going to beat the **** out of the truck, then I’d recommend either getting aftermarket fiberglass fenders, or just sticking with a nice set of 35” tires.

View attachment 162091

This is the look im hoping to achieve! That looks perfect.

I can grab some pics of the trimming I had to do if you’re still interested

Ill take them if you dont mind!

 

[1claire]

Ordered some 37x12.5 Ridge Grapplers

Could you tell us about your experience with Nitto Ridge Grappler? I'm thinking about getting a new set of mud tires and wheels and this product always appears on Google search.