We have to talk about CV Axles.....

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MTF

FRF Addict
Joined
Nov 27, 2010
Posts
5,438
Reaction score
2,375
Location
Celebration, Florida
Mid-perch is not a lifted truck!!!!
Ford designed the Raptor for Mid-perch but federal law requires the front bumper to be a certain height.
So. Ford had to set them at bottom perch.
I personally hated bottom perch, too much nose diving in turns and stopping.

Other than the IWE-delete, maybe over packing the grease and/or using the wrong grease.
 
Last edited:

dsiggi

Full Access Member
Joined
Nov 2, 2017
Posts
416
Reaction score
241
Location
Detroit
Mid-perch is not a lifted truck!!!!
Ford designed the Raptor for Mid-perch but federal law requires the front bumper to be a certain height.
So. Ford had to set them at bottom perch.
I personally hated bottom perch, too much nose diving in turns and stopping.

Other than the IWE-delete, maybe over packing the grease and/or using the wrong grease.
I actually just heard this recently. The local person that rebuilt my shocks worked on develoment of the Gen 1 and was telling me they were designed for mid perch. I wish Ford would have kept that option in the gen 2 without having to go to aftermarket collars.
 

Gumby

FRF Addict
Joined
Mar 7, 2023
Posts
1,856
Reaction score
3,543
Location
Nashville
going on 150K+mi over 8 years on OEM or Motorcraft boots with no issues
Are you running IWE deletes? if I have said it once. I have said it 100 times. IWE delete is not a smart decision. IMO especially on a daily driver. it is way easier to matin the IWE system. Than repair all the stuff delete can cause. I been doing mine while I rotate the tires. pull a vacuum on the entire system while you rotate. So easy
Of course it could be just a one off situation. LOL
 
Last edited:

MTF

FRF Addict
Joined
Nov 27, 2010
Posts
5,438
Reaction score
2,375
Location
Celebration, Florida
I actually just heard this recently. The local person that rebuilt my shocks worked on develoment of the Gen 1 and was telling me they were designed for mid perch. I wish Ford would have kept that option in the gen 2 without having to go to aftermarket collars.
I may be wrong here, but I think not all Gen 2s have a single perch setting.
Or it could be when guys are rebuilding shocks there is an option to change the body for the three perches.
 

Gumby

FRF Addict
Joined
Mar 7, 2023
Posts
1,856
Reaction score
3,543
Location
Nashville
I may be wrong here, but I think not all Gen 2s have a single perch setting.
Or it could be when guys are rebuilding shocks there is an option to change the body for the three perches.
I believe you are wrong only the 2.5 have adjustable perch.... stock. aftermarket I don't know about. Gen2 are top hats.
 

downforce137

FRF Addict
Joined
Jan 5, 2016
Posts
2,141
Reaction score
3,052
Location
In Diana
Are you running IWE deletes? if I have said it once. I have said it 100 times. IWE delete is not a smart decision. IMO especially on a daily driver. it is way easier to matin the IWE system. Than repair all the stuff delete can cause. I been doing mine while I rotate the tires. pull a vacuum on the entire system while you rotate. So easy
Of course it could be just a one off situation. LOL

i have been for a little while.. i was getting some random slight CV engagement on extended highway driving so i unplugged the solonoid and they are engaged full time now.. we'll see but Id think keeping them exercised would be fine.. time will tell because i tried replacing the check valve and was still having the issue.
 

Gumby

FRF Addict
Joined
Mar 7, 2023
Posts
1,856
Reaction score
3,543
Location
Nashville
i have been for a little while.. i was getting some random slight CV engagement on extended highway driving so i unplugged the solonoid and they are engaged full time now.. we'll see but Id think keeping them exercised would be fine.. time will tell because i tried replacing the check valve and was still having the issue.
I just did my buddies 2020 150 (non raptor) he would only get noise on Long drives. he did the solenoid and the check valve. didn't help. pulled a vacuum on the entire system it passed... just barely. Swopped out his IWEs. he just got back from an 8 hour road trip no noise.
 

TomDirt

FRF Addict
Joined
Jan 3, 2022
Posts
3,534
Reaction score
10,110
Location
Hesperia CA
I did get Trackmotive for this time around with their extreme articulation. Didn't do a thing as you see. They were both torn in 6 months.
I purchased a pair of them for my Gen 1, but they won't clear my Gen 2 shocks with the SVC coil adjusters, so I'm staying with the oem CV axles.
I researched the axles online. Couldn't find reviews for an F150 application, mostly just cars & other vehicles that don't really articulate much. There's one video on YouTube from a Dodge truck owner here:


he mentioned that he has a body lift only, and runs 37's. He says the boots have held up for 2yrs.
 
Last edited:
Top