Installed 37's on Gen3 35 Raptor - no issues.

[MORaptor1]

Same here, I put a ratchet strap there to keep it off the panhard bar but it fits for sure.

Is the winch welded in place or does it bolt on? I havent taken my spare down to look.

 

[4x4ready]

Im going to measure mine from a couple different reference points and post that....hopefully somebody with a 37pp raptor will have a chance to do the same. Something is different i suspect.

There were a few videos we found back when it was released confirming there was a difference but yes would be awesome to get the specifics.

 

[munch520]

Is the winch welded in place or does it bolt on? I havent taken my spare down to look

Sorry, winch?

 

[MORaptor1]

Sorry, winch?

The mechanism that uses a cable and crank to pull the spare off the ground and snug it under the truck……that hopefully you never have to use.

 

[munch520]

Shit I've had that thing down a few times to work on springs, rear bed bolts, diff cover, etc. It's been used all the time

TBH I have no idea, I think it's bolted in place, never thought to check since the "37 inch" KO2s are basically same weight as factory 35s.

 

[MORaptor1]

Shit I've had that thing down a few times to work on springs, rear bed bolts, diff cover, etc. It's been used all the time

TBH I have no idea, I think it's bolted in place, never thought to check since the "37 inch" KO2s are basically same weight as factory 35s.

That would be good. If it’s bolted, it can be unbolted and moved.

 

[taquitos]

Shit I've had that thing down a few times to work on springs, rear bed bolts, diff cover, etc. It's been used all the time

TBH I have no idea, I think it's bolted in place, never thought to check since the "37 inch" KO2s are basically same weight as factory 35s.

It is for sure bolted. The bracket it bolts to constrains it fairly well and would need modification beyond just slotting the holes most likely.

 

[ktrent]

Another 37s on a 35 truck with zero issues. Couldn’t be happier with the way it drives. Maybe the lighter FP Forged wheels but I swear it just seems lighter on its feet. I am still on stock suspension and have had zero rubbing with some mild off road driving so far. Did go with a 17x9 +12 offset so that helped a lot. Spare fits no problem. The ideal of moving the winch location back to pull the tire up and back has me thinking, so the next time I have the truck on the lift will check into how tough that would be. Only thing left to make it perfect is fix the speedometer. Thinking about going the Cobb route. Just hate to send my cpu off but it appears they have great turn around.

 

[So-Cal-Al-52]

Truck looks great, The wheels look fantastic.

 

[Bozz]

Another 37s on a 35 truck with zero issues. Couldn’t be happier with the way it drives. Maybe the lighter FP Forged wheels but I swear it just seems lighter on its feet. I am still on stock suspension and have had zero rubbing with some mild off road driving so far. Did go with a 17x9 +12 offset so that helped a lot. Spare fits no problem. The ideal of moving the winch location back to pull the tire up and back has me thinking, so the next time I have the truck on the lift will check into how tough that would be. Only thing left to make it perfect is fix the speedometer. Thinking about going the Cobb route. Just hate to send my cpu off but it appears they have great turn around. View attachment 422000View attachment 422001

Never seen tpms indicate the same pressure on all four tires before. EVER.

Where you at in TN?