Nap925
Member
I've been trying to trouble shoot an A/C issue. With the warm weather lately, I've been noticing a somewhat intermittent issue. The A/C is cold and coming through the vents but, doesn't seem to blow/flow freely, no matter how high I turn the fan up or if I recirculate or not recirculate, the airflow is low. When the air flow is set on high, level 4 and higher, it sounds like there's a restriction and I don't feel the air blowing as high as it should.
When not running A/C, normal vent mode, air flows fine even at low settings! Sometimes, when I turn the A/C off, and it switches to the "normal vent" mode, air flows freely again. I've found the earlier GEN1's had issues with the vent door/flap breaking but, never found anything for the GEN 2's? Wondering if it's the issue?
Has anyone had similar issues and what was done? Only searches that comes up are for bad A/C smells.
Thanks in advance!
When not running A/C, normal vent mode, air flows fine even at low settings! Sometimes, when I turn the A/C off, and it switches to the "normal vent" mode, air flows freely again. I've found the earlier GEN1's had issues with the vent door/flap breaking but, never found anything for the GEN 2's? Wondering if it's the issue?
Has anyone had similar issues and what was done? Only searches that comes up are for bad A/C smells.
Thanks in advance!