URGENT HELP NEEDED

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Raptized

Full Access Member
Joined
Dec 30, 2016
Posts
564
Reaction score
127
Location
Raptorida
I need someone to help my sanity and post a picture of the inner side of their passenger side CV axle. It seems that something isn't in all the way and no matter what I do nothing moves. Pic 1 driver side, pic two with blue rag passenger side. 1000006114.jpg1000006115.jpg
 
OP
OP
Raptized

Raptized

Full Access Member
Joined
Dec 30, 2016
Posts
564
Reaction score
127
Location
Raptorida
Empty pic. No amount of beating is getting this in. Have even tried turning and hitting in case something isn't lined up
1000006121.jpg
 
OP
OP
Raptized

Raptized

Full Access Member
Joined
Dec 30, 2016
Posts
564
Reaction score
127
Location
Raptorida
Retaining ring is still there in the groove I just happened to take the picture at the opening. I believe those splines are supposed to be inside that shaft.
 

The Car Stereo Company

aka grumpy car stereo guy and frf rolodex
Supporting Member
Joined
Jul 8, 2012
Posts
32,599
Reaction score
23,628
Location
here, on frf
you ever done these before? if not, you may not be getting them in all the way. you really need to ram these things home. i line it up and push it in. once there i back it out a couple inches making sure its still lined up and slam it in place. sometimes it takes me a couple tries
 

downforce137

FRF Addict
Joined
Jan 5, 2016
Posts
2,130
Reaction score
3,027
Location
In Diana
its in bro. thats what its supposed to look like.

the orange sealant is the edge of the seal.. the intermediate shaft on teh passenger side. thats what it looks like..

the oring seals the axle shaft end from getting dirt in there..

everthing is fine.. whats the problem? oil leak? the seal prob needs to be replaced

looks weird because driver side is male CV, and pass is female...

 
OP
OP
Raptized

Raptized

Full Access Member
Joined
Dec 30, 2016
Posts
564
Reaction score
127
Location
Raptorida
you ever done these before? if not, you may not be getting them in all the way. you really need to ram these things home. i line it up and push it in. once there i back it out a couple inches making sure its still lined up and slam it in place. sometimes it takes me a couple tries
No. I watched three videos and took pictures of everything before and as I went but didn't think to take a picture of the inner cv hub seating.
its in bro. thats what its supposed to look like.

the orange sealant is the edge of the seal.. the intermediate shaft on teh passenger side. thats what it looks like..

the oring seals the axle shaft end from getting dirt in there..

everthing is fine.. whats the problem? oil leak? the seal prob needs to be replaced

looks weird because driver side is male CV, and pass is female...

I installed it and it engaged the retaining clip. It is just throwing me off not looking the same as the driver side. Nothing is leaking and it seems to be driving ok as I just went up and down in the street in 4wd. Thanks for the reassurance. If I don't get a photo on here I will drive around and find one for sale and climb under it and look and the passenger side cv.
 
Top