Show off your latest pics

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

TomDirt

FRF Addict
Joined
Jan 3, 2022
Posts
3,704
Reaction score
10,583
Location
Hesperia CA
There's gotta be some actual engineering involved when they call out aluminum torx bolts in an aluminum case.

That hardware is available somewhere. As much fun as it was to remove & replace that 80lb transfer case & that 220lb 6R80 trans, I went with the oem hardware & torque settings because I don't want to think about something failing later.
 

TomDirt

FRF Addict
Joined
Jan 3, 2022
Posts
3,704
Reaction score
10,583
Location
Hesperia CA
Today's project: figuring out how to get 325ft/lbs on the new steering rack bolts with an aching wrist.
#GettingOldIsn'tForSissies
 

Attachments

  • Screenshot_20241228-075836_Gallery.jpg
    Screenshot_20241228-075836_Gallery.jpg
    208.8 KB · Views: 7

The Car Stereo Company

aka grumpy car stereo guy and frf rolodex
Supporting Member
Joined
Jul 8, 2012
Posts
32,744
Reaction score
23,907
Location
here, on frf
Today's project: figuring out how to get 325ft/lbs on the new steering rack bolts with an aching wrist.
#GettingOldIsn'tForSissies
well if 2 goats weigh in at 150 pounds each, i believe putting them on approximately a 13 inch rod will get you the results you need
 
Top