Security Systems

[BOJANGLES]

i never had that question......let me check with my dei rep today

Thanks Noah. If there is a way to do it it would help me out a lot.

 

[The Car Stereo Company]

ok bo, here is how you lock the buttons on the 1 way remote.

hold the f button for 8 seconds until it emits 1 long beep this is the programming mode
press and release the unlock button. you should see 2 flashes on the remote.
press lock to turn on/off the autolock feature
press and release the f button to go back/exit. each press goes back one step. when the led turns off you have exited programming.

to access the buttons you need to press the f button followed by the button you wish to access

 

[BOJANGLES]

ok bo, here is how you lock the buttons on the 1 way remote.

hold the f button for 8 seconds until it emits 1 long beep this is the programming mode
press and release the unlock button. you should see 2 flashes on the remote.
press lock to turn on/off the autolock feature
press and release the f button to go back/exit. each press goes back one step. when the led turns off you have exited programming.

to access the buttons you need to press the f button followed by the button you wish to access

Awesome, thanks Hombre.

At first I thought it wasn't working, or I wasn't programming it right, but after some trial and error I realized after following your instructions above you have to leave the remote untouched for a while (I dunno, maybe 10 seconds?) for it to lock itself. Once that happened now I have to hit F then Unlock in order to get the buttons to work. No more accidental remote starts.

 

[The Car Stereo Company]

sorry, i forgot to mention. its a 20 delay until the buttons lock

 

[BOJANGLES]

No worries, thanks again for digging that up for me.

 

[The Car Stereo Company]

not a problem bo. anytime anyone need any info, im here

update though, i just placed my dei order. the viper 5904 is on back order and it wont ship until dec 7th so for all who were waiting for an install video, it is going to take a couple weeks.

this is what will be covered in my alarm install

5904v remote start alarm
DB ALL bypass for remote start
506t glass break sensor
530t (x2) window automation module
p/n 8601 magnetic reed switch for tailgate
and possibly a tilt sensor and backup battery siren, but not quite sure yet

 

[Dr_Pain]

not a problem bo. anytime anyone need any info, im here

update though, i just placed my dei order. the viper 5904 is on back order and it wont ship until dec 7th so for all who were waiting for an install video, it is going to take a couple weeks.

this is what will be covered in my alarm install

5904v remote start alarm
DB ALL bypass for remote start
506t glass break sensor
530t (x2) window automation module
p/n 8601 magnetic reed switch for tailgate
and possibly a tilt sensor and backup battery siren, but not quite sure yet

Can't wait!!
Any thoughts on a group buy and pricing for the alarm and modules?

 

[The Car Stereo Company]

probably not. i just did a search on these alarms. people can buy them at well below my cost. pretty lame that these are ****** out everywhere. the one good thing about buying from a dei authorized dealer is the warranty. i just pulled out an alarm from 14 years ago and sent it in. they are sending me a new one (updated model) free of charge. but most people wouldnt care about that kind of warranty and would rather save a few hundered dollars. you can seriosly buy 2 alarms for the retail price of one. to be honest there is no way i could even compete with some of these prices. the only thing i got going for me is that im an authorized dealer, but still.....

 

[Mike Hammer]

I got this one 3 years ago installed for only $550.00 out the door.
They wanted way more but I kept calling each shop that installed it and each one kept beating
the other persons deal until they couldn't go any lower.
Yes I'm a **** for doing that but I needed a good deal after spending all my money on the truck.

I don't think your a **** for doing that, its smart bussiness if you have the time to get it done. But again sometimes the lowest price does not get the best quality install.

 

[dataustin]

I second what Mike said.....I don't think you are a ****!