Installed RPG Offroad Collar

[Nogard]

RPG lift installed. Measuring from the fender lip to the center of the wheel, it's perfect. Same distance front and back. Thanks RPG. You nailed it, and, the quality is second to none.

Any noticeable difference in ride quality? I've got a shop by me that does a lot of truck mods and when I mentioned the perch adjustment the guy behind the counter insisted on a leveling kit (I personally don't care to go that route) because of the complaints about ride quality suffering with a perch mod. Seems perch mods are the way to go from everything I've read on this forum.

Btw, truck looks great! I have a black Scab that I would like to level.

 

[Huck]

Any noticeable difference in ride quality? I've got a shop by me that does a lot of truck mods and when I mentioned the perch adjustment the guy behind the counter insisted on a leveling kit (I personally don't care to go that route) because of the complaints about ride quality suffering with a perch mod. Seems perch mods are the way to go from everything I've read on this forum.

Btw, truck looks great! I have a black Scab that I would like to level.

On Gen1 there was a pretty substantial difference in ride quality when going to mid perch. ride was much stiffer.

 

[u0104940]

This was just a test fit. This is stock height no collar. We are expected our collars in this week and will be putting it on and determining exactly how much trimming there will be.

@sandtrooper29 , any update in regards to the 37" tire fitment?

 

[JonasAtLethal]

I'm going to have to say mine is pretty close. So much better!

Yeah mine too, it's pretty damn close if not dead nuts level

 

[sea2jet]

I think the RPG collar gets it pretty darn level. I don't think I would want to go any higher. It has settled after 250 miles on frost heaved roads and now the rear is 1/4" higher than the front. Looks perfect.

 

[xrocket21]

Yeah mine too, it's pretty damn close if not dead nuts level

damn thats hot

it is like looking into the future!

Nice choice!

 

[Raptizzle]

Springs are going to settle a bit overtime so I wouldn't get too hung up on exact height measurements on a freshly built truck.

 

[crash457]

Springs are going to settle a bit overtime so I wouldn't get too hung up on exact height measurements on a freshly built truck.

And the ones built in October that sat until January will settle too.

 

[MajorAR]

Here are a few photos from an installation today with the shocks on the vehicle. [emoji1417]









(1) jack stand
18mm combo
8mm on 1/4" ratchet
3/16 Allen wrench
Rubber mallet
Torque wrench
Floor jack
Aluminum block
external coil spring compressor (can rent this item from most auto part stores)


Sent from my iPhone using Tapatalk

 

[SilentShooter]

I see Corey in his natural habitat.. Much different then in the UP..