Installed 37's on Gen3 35 Raptor - no issues.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

GDITheMan

Full Access Member
Joined
Jan 31, 2023
Posts
133
Reaction score
143
Location
The mountain
I've read through this. Sounds like I could put 37x12.5x17 tires on my stock cast wheels and clear everything.

Is that right? Would be a good way to see if I like 37s.
 

Sig Fanboy

Full Access Member
Joined
Apr 2, 2023
Posts
786
Reaction score
1,717
Location
WV
I've read through this. Sounds like I could put 37x12.5x17 tires on my stock cast wheels and clear everything.

Is that right? Would be a good way to see if I like 37s.
Yes, no rubbing on stock wheels. For mall crawling at least. I’d avoid rock crawling.
 
OP
OP
4x4ready

4x4ready

Active Member
Joined
Jun 11, 2020
Posts
73
Reaction score
130
Location
USA
Yes, no rubbing on stock wheels. For mall crawling at least. I’d avoid rock crawling.
Have you tried crawling and encountered rubbing? I’ve full articulated my 37s on my stock wheels and haven’t encountered any rubbing. Gen 3 raptor fenders are completely different from gen 2 raptor fenders. Stock wheel beedlocks or any other wheel matching those specs / offset will be fine
 

BoostCreep

FRF Addict
Joined
Jun 25, 2021
Posts
1,856
Reaction score
2,374
Location
SoCal
Have you tried crawling and encountered rubbing? I’ve full articulated my 37s on my stock wheels and haven’t encountered any rubbing. Gen 3 raptor fenders are completely different from gen 2 raptor fenders. Stock wheel beedlocks or any other wheel matching those specs / offset will be fine
What 37s were you using?
 

raxson raptor

Member
Joined
Aug 1, 2023
Posts
1
Reaction score
0
Location
SC
Would a 2.25 RPG collar be too much if I throw on some 37 BFGs. Currently rocking it and don’t want to pay the money to do anything else
 
OP
OP
4x4ready

4x4ready

Active Member
Joined
Jun 11, 2020
Posts
73
Reaction score
130
Location
USA
What 37s were you using?

Good point, the tires were listed in Post #1 here. Tires are BFGoodrich 37X12.5R17LT 116S KO's (specs here) - which are what also come with the 37 Package, however my Raptor was not a 37 pkg. The only other difference I could find on the chassis was in the spare tire location. Otherwise it was the same as a 37 pkg raptor when I checked.
 
OP
OP
4x4ready

4x4ready

Active Member
Joined
Jun 11, 2020
Posts
73
Reaction score
130
Location
USA
What 37s were you using?

From Post #1 here:

“Tires are BFGoodrich 37X12.5R17LT 116S KO's (specs here) - which are what also come with the 37 Package but my Raptor was not a 37 pkg.”

The only difference in 35" / 37" raptor chassis I could find was in the spare tire location. Don't see why they would rub with stock wheels / stock offset since it doesn’t with the 37 factory pkg.
 
Last edited:

MORaptor1

Full Access Member
Joined
Jul 13, 2023
Posts
364
Reaction score
282
Location
SW Missouri
My opinion….nothing more. Unless ford comes out with a 37” refit package for 35” raptors…..stick with 35’s, or get a factory 37”. Now….if you are going to drop 10k on a built custom suspension, I’m not talking about you. These trucks were engineered, quite thoughtfully, to run hard-ish on their stock sized meat.
 
Top