Hey guys, want to share my experience. I was following this procedure above in my 2023 Raptor, but ended up with working HSW, and disabled steering wheel buttons, I’ve spent some time trying to find the problem and with the help of great folks from F150gen14 forum and their suggestion I’ve installed the SCCM part number ML3Z-3F791-HB. After installing it I reprogrammed everything and my buttons are active, and HSW working. I’m not sure why the -BB wasn’t working for me, but it appears that few people installed -HB instead of -BB part in 2023 Raptors because of the similar problem. My point is if there is no back order on HB part, order it to be on the safe side. I also want to point to the importance of the correct Forscan procedure.
1. Before you start replacing parts Back up modules: HVAC, SCCM, APIM
2. Replace parts
3. Connect Forscan and make new scan without loading vehicle profile
4. Write your backed up HVAC, SCCM builts into the new modules.
5. Restart, connect the Forscan again and scan all modules
6. Using screenshots of the spreadsheet on the page 7 made the built changes.
8. Enjoy
Also if you forgot to back up your original built you can request all of it from
https://www.motorcraftservice.com/AsBuilt
I know that 5. is an extra step, that might be not needed, but again I am sharing my experience and want to show how I’ve done it.