Ford Tech One,
I have a serious question... I took my 19 in for the cam phaser recall, and here is the issue
1) I asked them to rotate the tires -- They did not, and the tech when asked lied and said he did
2) I asked them to change the oil while in the shop, they tried to bill me for the oil change and filter and bill ford at the same time, they backed out the bill to me
3) The did not change the filter, I drove the truck home from the dealership and found mud on my filter, The 10 mile drive home was in dry conditions and all paved.
4) I found 2 missing bolts from my skid plates
5) When I took it back to the shop to call them on the carpet today, the found the other skid plate bolts cross threaded...
Here is my question, I cannot really tell if they went into my engine or not, and the noise is gone. I have ZERO hope that this lying idiot who cross threaded skid plate bolts actually did the repair right. So is there a way to go into this engine for the CAM noise and just over tighten something down to get it to become quiet only to blow up later?