Theproperedneck
Full Access Member
So I figured I would treat the white rhino to some illumination customization. So I called up jimmy at WSI and roughly $300 later I had me #3 bracket produced. (cbfreshness got #2) Also picked up 4 Whelen Dual Slim Lines to compliment this marvel of sheet metal technology.
Install went super easy I maybe had 2 hours total into it. The bracket utilizes the bolts adjacent to the rubber hood stops and the included "Z" brackets utilize the 2 bolts that hold the hood latch in. I installed the brack first and the lights second then neatly routed the wires up and over toward the battery. I previously put a fuse block under the hood so hooking up the lights was as easy as crimping on some ring terminals and installing a fuse.
Over all really happy with this bracket and the output of the 4 slim lines.
Writing this on my way to snoball so I'll let that be the true test and will be sure to throw up pictures.
Install went super easy I maybe had 2 hours total into it. The bracket utilizes the bolts adjacent to the rubber hood stops and the included "Z" brackets utilize the 2 bolts that hold the hood latch in. I installed the brack first and the lights second then neatly routed the wires up and over toward the battery. I previously put a fuse block under the hood so hooking up the lights was as easy as crimping on some ring terminals and installing a fuse.
Over all really happy with this bracket and the output of the 4 slim lines.
Writing this on my way to snoball so I'll let that be the true test and will be sure to throw up pictures.
