COBB Accessport V3 with TCM module for Gen 2 for 2017-2020

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Therock88

Full Access Member
Joined
Sep 11, 2021
Posts
182
Reaction score
294
Location
Office Chair
I have a COBB Accessport (purchased through @GooseTuned) used on my 2018 Raptor. Now have Gen 3 and no need for this one. It will have all the Cobb off the shelf tunes and Cobb TCM tunes. No issues. Uninstalled as you can see from the Screen Capture. All firmware updates done to date. Great condition...Only used a few times to flash, then put away. Comes with the original box and case, and all accessories in great condition, as shown in pics.. Contact Winfrey @ Goosetuned if you would like to add custom tunes for your vehicle. Still has plastic protector over AP Screen. $550 PayPal - shipped to confirmed US addresses in the contiguous states.

Thanks!
DC
 

Attachments

  • Cobb2.jpg
    Cobb2.jpg
    323 KB · Views: 28
  • Cobb3.jpg
    Cobb3.jpg
    99.2 KB · Views: 28
  • Screenshot 2024-09-30 075217.jpg
    Screenshot 2024-09-30 075217.jpg
    32.4 KB · Views: 26
  • Screenshot 2024-09-30 075641.jpg
    Screenshot 2024-09-30 075641.jpg
    52.3 KB · Views: 24
  • Screenshot 2024-09-30 075722.jpg
    Screenshot 2024-09-30 075722.jpg
    75.8 KB · Views: 25
OP
OP
Therock88

Therock88

Full Access Member
Joined
Sep 11, 2021
Posts
182
Reaction score
294
Location
Office Chair
Wouldn't this have to be updated to work with a NEW VIN? I assume there is some cost to have that updated?
I checked with COBB and Winfrey at Goosetuned... And my understanding from BOTH sources is that it CAN be INSTALLED on another vehicle if it is UNINSTALLED from the original.
That is why I posted this image (below again) - to show the current state as "UNISNTALLED" - "NOT INSTALLED". I took that Screen capture just this AM before boxing it up.

I also had Winfrey at Goosetuned walk me through the uninstall procedure and did it 3 times to be as certain as I could that it was uninstalled from my last Raptor. That is about as certain as I think you can get.
Screenshot 2024-09-30 075217.jpg

This is from the COBB website:

Installed State​

The installed state is just as important as whether or not the Accessport is the correct part number. If it is already installed (or “married”) to another vehicle, it will not work on your vehicle. The installed state can be checked by plugging the Accessport into any car (any car with an OBD2 port, compatibility for this step is not required) or computer and completing the steps above or with a quick scroll through the main menu. If “Install” is an option, this Accessport is ready to work on another compatible vehicle. If “Uninstall” is an option, this Accessport will not work on your vehicle until it is uninstalled from the previous vehicle or sent to COBB to be re-licensed.

I am not a COBB expert, but this is what I learned from COBB and Goosetuned. And have seen many sold like this on the forum.

Best I can do to explain with what I understand to be the facts.

Take care,
DC
 
Last edited:
OP
OP
Therock88

Therock88

Full Access Member
Joined
Sep 11, 2021
Posts
182
Reaction score
294
Location
Office Chair
For those that have IM'd me. This is STILL available. A few have asked about it and said they were interested, but no one has paid for/bought it yet

I will add a SOLD post when it is actually paid for.

Thanks for all of the interest.
 
Top