Truck won’t start after battery went dead & was recharged

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Muchmore

FRF Addict
Joined
Dec 23, 2018
Posts
1,707
Reaction score
3,301
Location
Kansas City
I GUARANTEE it's something to do with low electricity somewhere. Low battery, crappy jump starter/cables that simply can't move enough electrons. These trucks are super sensitive to low voltage.
 

Sunchild714

Full Access Member
Joined
Apr 14, 2019
Posts
291
Reaction score
295
Location
Las Vegas
I purchased an Optima Yellowtop that only lasted 6 months. Went and replaced it on warranty and been running this one for almost 4 years now. Point - Just because it's a new battery doesn't mean it's a good battery.
 

raptorsub

Active Member
Joined
Mar 7, 2024
Posts
60
Reaction score
71
Location
Atlanta
I would start with a new battery first. Just because it's only 6 months old does not mean it doesn't have a bad cell or something wrong with it. If the issue is still there after that. You can eliminate it being a battery issue. The battery can show a good voltage but not be able to handle any load when applied. In my experience when you get just a click when trying to start. It is the battery. You can hold a volt meter on the battery and try to start it. See how far down the voltage goes.
 

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77
Joined
Dec 16, 2016
Posts
17,689
Reaction score
27,295
Man these trucks are so finicky with low power from batteries, I'm on my 4th battery in 6.5 years... I would get a new battery honestly.
The fúck?
I know we’re only exchanging anecdotal evidence and <knock wood> Lucille is rocking a battery from November ’16. And at least 6 of that is with a pair of amps, + between 30-50 amps worth of aux lighting over the years.

My completely unscientific observation is that we are seeing many more battery/charging issues with the Jen Tres for the length of time they’ve been in service. Sure, Jen Too definitely had a few happen- my fav was the guy with the sync screen that would come alive at night; his stealership caught it on in cabin video.

I would start with a new battery first. Just because it's only 6 months old does not mean it doesn't have a bad cell or something wrong with it. If the issue is still there after that. You can eliminate it being a battery issue. The battery can show a good voltage but not be able to handle any load when applied. In my experience when you get just a click when trying to start. It is the battery. You can hold a volt meter on the battery and try to start it. See how far down the voltage goes.

IDK about this. If he does the battery and there is another issue going on, he’s going to trash that battery too.
Starting the truck is, quoting then VP Joe Biden - “a pretty big, fúcking deal”. I still had auto stop/start enabled when I upgraded the stereo and the restart would scram both my amps. I checked and found the voltage dropping to about 9.2 to 9.6v during startup- definitely enough to scram both amps so I disabled the auto stop/start.

of course, at this point it’s looking like he may not have much choice.

battery is good, checked
You know the battery is good, how?
has it been load tested?
if it is good under load...
Codes U3014, U0258, and B108A.
have you cleared these codes? if not, try this.

Any chance BMS is disabled (likely via FORSCAN)? A new battery should need a BMS reset, but not sure about a full discharge and recharge.
What mods are on the truck?
 
Top