Protecting your Raptor in the Winter from Corrosion

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

CoronaRaptor

FRF Addict
Joined
Dec 17, 2012
Posts
28,961
Reaction score
31,191
Location
CANADA
For you guys with new trucks or low mileage very clean, I would remove the bed bolts and apply anti-seize to them, especially if you do plan to keep the truck for a long time. This way you can remove the box a few years down the road and clean up your frame and undercarraige relatively easy. Just an idea, wish I had of done that back when mine was new.
 

911 Crazy

FRF Supporting Member
Supporting Member
Joined
Jul 23, 2019
Posts
7,653
Reaction score
3,136
Location
Maine
For you guys with new trucks or low mileage very clean, I would remove the bed bolts and apply anti-seize to them, especially if you do plan to keep the truck for a long time. This way you can remove the box a few years down the road and clean up your frame and undercarraige relatively easy. Just an idea, wish I had of done that back when mine was new.

Is this sage advice for us Prius owners also?
 

Oldfart

FRF Addict
Joined
Oct 21, 2017
Posts
6,025
Reaction score
14,951
Location
Saggy Balls Division of PA Trump Army
For you guys with new trucks or low mileage very clean, I would remove the bed bolts and apply anti-seize to them, especially if you do plan to keep the truck for a long time. This way you can remove the box a few years down the road and clean up your frame and undercarraige relatively easy. Just an idea, wish I had of done that back when mine was new.

I had just read in another post that the bed bolts are now one time use items.
 

MnFlyer

Full Access Member
Joined
Mar 26, 2019
Posts
399
Reaction score
356
Location
MN
I had just read in another post that the bed bolts are now one time use items.
Yes. The rear most 4 bolts, more specifically the U nuts they thread into. The U nuts are not threaded, the bolts thread them as you screw them down. Once the bolt and U nut have been “mated” they both need to be replaced if you take the bolt out.


Sent from my iPad using Tapatalk
 

MnFlyer

Full Access Member
Joined
Mar 26, 2019
Posts
399
Reaction score
356
Location
MN
So for a first time for any protectant on the truck, how many cans of each would you propose?
I’ve gone through 6 cans over 1.5years coating the frame and rear axle/diff.

I think I’ve got the frame covered well, the axel and diff seem to need the most touch up.

I have my mechanic hit the inner part of the frame when he has it up for an oil change. I do that 2 to 3 times a year just to be sure.

My frame and axel look as black as the day I bought it.


Sent from my iPad using Tapatalk
 
Top