Post Your Wheel and Tire Pics !

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

FP Forged

Justin
Supporting Vendor
Supporting Member
Joined
Feb 7, 2014
Posts
1,083
Reaction score
871
Location
Reno, NV
New Fuel Trophy Wheels in 29 degrees...


10487-close-up.jpg


I'm very pleased with the new look...

Fuel Trophys on Nitto M/T's 35x12.50. Mid Perch. I like it.







I see lots of Trophy's and no flush mounts caps. You guys are missing out.
 

Attachments

  • cap 3.jpg
    cap 3.jpg
    60.3 KB · Views: 203

TexasTexas95

Active Member
Joined
Nov 4, 2013
Posts
72
Reaction score
34
Location
Central Texas
Haha. Easy now, they are about three days old now and the flush mount caps aren't exactly cheap for 4. It's on the mod list, however, it just sits a bit lower than other things. I paid less to have my current flares painted than what those little flush caps cost. Resonator delete to come, then front fenders to ensure a tad bit more clearance up front.
 

FP Forged

Justin
Supporting Vendor
Supporting Member
Joined
Feb 7, 2014
Posts
1,083
Reaction score
871
Location
Reno, NV
Haha. Easy now, they are about three days old now and the flush mount caps aren't exactly cheap for 4. It's on the mod list, however, it just sits a bit lower than other things. I paid less to have my current flares painted than what those little flush caps cost. Resonator delete to come, then front fenders to ensure a tad bit more clearance up front.

I think I need a painter like yours. Mine are getting painted right now. And it's a lot more than $200 :emotions122:
 

TexasTexas95

Active Member
Joined
Nov 4, 2013
Posts
72
Reaction score
34
Location
Central Texas
$175 bucks El Paso, Texas. Guaranteed work for as long as I own the vehicle. If anyone is in the West Texas area, I know just the guy to do it. My Dad got a twin Raptor just like mine and he's getting his done as we speak.
 

carlschmarl2

Full Access Member
Joined
Dec 8, 2012
Posts
480
Reaction score
187
Location
Chagrin Falls, OH
I've worn out a few pairs of BFG A/Ts and they always seem to wear the middle out first no matter what vehicle/psi I've ran them on. They also seem to grip very well down to the last few 32nd's.

I just rotated my tires in preparation for the SnoBall and noticed my stockers were worn real bad in the center with good tread on the outsides.

I'm running about 44-45 psi in each tire. Why do they wear so bad?

And the kicker is, I only have 32K miles on them. I was hoping for another 10-15k! These tires wear bad. Will not purchase again. Not to mention then suck when you get a little mud in the treads.
 

Orionkhan

FRF Supporting Member
Supporting Member
Joined
Oct 29, 2013
Posts
154
Reaction score
66
Location
SoCal
I just rotated my tires in preparation for the SnoBall and noticed my stockers were worn real bad in the center with good tread on the outsides.

I'm running about 44-45 psi in each tire. Why do they wear so bad?

And the kicker is, I only have 32K miles on them. I was hoping for another 10-15k! These tires wear bad. Will not purchase again. Not to mention then suck when you get a little mud in the treads.

Typically, uneven tire wear in the center of the tread is due to over inflation. Try dropping your tire pressure down a bit. Maybe 40 or so.
 
Top