New Gen 3 Lower Bumper 6"-12" Light Bar kits launching for Preorder Soon (Check them out...)

[gobluejd]

Will the mounts be steel or 3D printed?

 

[Specialtyperformanceparts]

Will the mounts be steel or 3D printed?

LOL, well plastic wouldn't hold up that well after a few bumps... The prototypes are plastic just to check sizing and fitment. From there, we have our Cadwork transferred for laser cutting on stainless steel, formed, then powdercoated.

John

 

[911 Crazy]

Do you mean an in front of bumper light bar?
Yes, we will work on no drill mounts for that as well after we finish those other kits.
We have one similar for the Gen 2 that requires no modification to
The truck…

View attachment 321152View attachment 321153View attachment 321154View attachment 321155View attachment 321156

Do the 4 large round lights require mounting directly to the bumper?

 

[Specialtyperformanceparts]

Do the 4 large round lights require mounting directly to the bumper?

Do you mean the 6" Rigid 360's? or Baja LP6's? Yes. We had a mount for those on the 2nd gen. We will work on one for this one as well.

 

[911 Crazy]

Do you mean the 6" Rigid 360's? or Baja LP6's? Yes. We had a mount for those on the 2nd gen. We will work on one for this one as well.

It would be for my 2020. So no bumper drilling as there is a mount available?

 

[911 Crazy]

The round bumper lights in post #5. What are those?

 

[Specialtyperformanceparts]

The round bumper lights in post #5. What are those?

Yes. We have a no drill option.

It is here as a kit-

(Discontinued) SPV Parts 2017-2020 BUILD YOUR OWN Ford F-150 Raptor No Drill OEM Bumper Universal Light Mount Kit

Create your own bumper light mount kit for your 2017-2020 Ford F-150 online. This kit comes with your choice of light combos and wiring harnesses.

specialtyperformanceparts.com

However, you are in luck if you snag it in time....

The one in those pictures we had put on our test truck. We removed them and have them for sale in our open box "Deal" section for $981 with free shipping, harness, etc.

Demo/Take Off Kit - 2017-2020 BUILD YOUR OWN Ford F-150 Raptor No Dril

As we transition to our next Gen demo/Prototype truck, we have lots of cool Products we are taking off the current one. Save money on this LIKE NEW take off Universal Bumper Mount Kit... It includes everything you need to install and will come with full warranty as you will be the first owner...

specialtyperformanceparts.com

John

 

[koyojo]

Yes. That is completely doable.
The only thing to keep in mind is, legally, Ford must make factory fog lights turn OFF when the bright's are on. So keep in mind that using the switch, it will turn off the fogs when your bright's go on...
That being said, if you follow us and some of the things we offer and specialize in, such as our plug N play harness system with weatherproof connectors. Here are some other things I have found, that we will have a remedy for.

The Aux 1 switch wire is NOT located with the rest of the bundle. Only 5 wires are now up there. I dug through all the wires in that entire ream of probably 300 wires where they come out. It appears they didn't even run that wire through the Aux wire area at all. So without pulling the entire factory harness, or taking apart the fuse panel where it connects under the hood... the only place to access that Aux 1 wire are the 2 connectors located where the stock fogs are. That is also where the connectors for the stock fog switch wire is. So we want to keep it simple. We need to make it easy for people to connect their wiring and run their lights. We also want access to all those connections in the same location with the other 5 Aux wires.

So, we are going to introduce a new slim plug n play access harness that will connect and combine to the 4 plugs (2 on each side) where the fogs were, and run to the same spot the other switch wires are, right behind the battery by the headlight. It will be very slim and very simple. Then you will have 6 switch wires and a factory fog wire right there to connect to any of our harnesses or lights. If you want to put A-pillars on the fog switch, or whatever? You can. Just keeping in mind max amp draw. If exceeded, you just plug in our plug n play relay up to 30 amps. That's the other nice thing about all the wires being right there.

John

Perfect, that is what I was hoping for.

 

[Raptorlaw]

As an alternative for the lower grill, do you have an option for two 2x2 lights on either side, leaving the middle open for airflow or license plate?

 

[Specialtyperformanceparts]

As an alternative for the lower grill, do you have an option for two 2x2 lights on either side, leaving the middle open for airflow or license plate?

Do you mean where the fogs are? The corner pockets?

Yes, we are working on a bunch of options, including replacement fogs, lower light bar and upper light bars behind the grille, as well as a 40” bumper mount light bar.
Also A-Pillar.

If you mean 2 small lights in the lower grille but just not a bar, you could do that with the light bar brackets we have with one on each side if you wanted.
As far as airflow, there is still ample flow and the light bars aren’t that tall.

John