There are 2 service messages for window concerns. Since yours was built after 3-8-21, would qualify under this one, so it should just need a software update.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
You are the man @FordTechOne - always appreciate your assistance.There are 2 service messages for window concerns. Since yours was built after 3-8-21, would qualify under this one, so it should just need a software update.
50701 - 2021 F-150 - Various Mirror, Door Lock, And Window Functions Inoperative
Some 2021 F-150 vehicles may exhibit various mirror, door lock, and window funct ions/features inoperative. There may also be various diagnostic trouble codes (DTCs) present in the driver door module (DDM) and/or passenger door module (PDM). This may be due to the configuration of the DDM and/or the PDM. To correct the condition, download and run the DDM - Driver Door Module (DDM) Configuration and the PDM - Passenger Door Module (PDM) Configuration app using the latest version of the Ford Diagnosis and Repair System (FDRS).
Just need to recalibrate your window. It's in the manual. Goes something like:GRRRRR - This started again today after disappearing back in summer when I originally commented. I have been to dealer for recall software updates but never mentioned the service bulletins @FordTechOne mentions above.
Anyone have this happen multiple times and/or resolved permanently through the software updates (or through some other method of resolution)?
Yeah, I did that for the auto window roll up not working for passenger side. That resolved itJust need to recalibrate your window. It's in the manual. Goes something like:
Perform all this within 30 seconds:
1) roll window all the way up and hold button for a few seconds.
2) roll window all the way down and hold button for a few seconds.
3) roll window all the way up and hold button for a few seconds.
4) roll window all the way down and hold button for a few seconds.
Just did this the other day to fix both the 4" issue and to reset my auto up/down window function.