Intercooler condensation

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ogdobber

FRF Addict
Joined
Feb 9, 2017
Posts
1,160
Reaction score
1,563
I have water/**** on a factory tuned car. It doesn't misfire as you said.

but you are injecting a metered amount of ****/water when your engine is hot and heatsoaked. right?
So take off your sprayers, get rid of the **** and dump some water in shortly after startup on acceleration. I guarantee it will stumble

so I was thinking, there is a factory tuned car that could benefit from ****/water injection. wrx. did i guess right, is that what you have? :supergay:
that is a shit ass heat absorbing intercooler location
 

tightt

Active Member
Joined
Jan 21, 2017
Posts
71
Reaction score
63
Location
Northern, NJ
but you are injecting a metered amount of ****/water when your engine is hot and heatsoaked. right?
So take off your sprayers, get rid of the **** and dump some water in shortly after startup on acceleration. I guarantee it will stumble

so I was thinking, there is a factory tuned car that could benefit from ****/water injection. wrx. did i guess right, is that what you have? :supergay:
that is a shit ass heat absorbing intercooler location


I think you have lost track of what you're even arguing about. You stated that adding water/**** injection system without adding additional boost and/or timing will result in misfires. I disagreed and provided my proof. You have now ran this discussion so off course that I think I'll retire.

And no its not a WRX. Its a 996 911 turbo. :flipthebird:
 

OPT PRIME

Full Access Member
Joined
Jun 22, 2017
Posts
486
Reaction score
275
To weep or not...

WEEP HOL is available as a custom plate

I am sold. Where do I drill this thing? And at cruise / vacuum won't dirt get sucked in through that hole?
 

Sasquatch77

Banned
Joined
Feb 25, 2016
Posts
825
Reaction score
164
To weep or not...

WEEP HOL is available as a custom plate

I am sold. Where do I drill this thing? And at cruise / vacuum won't dirt get sucked in through that hole?

Lowermost corner, driver side of the intercooler. This is never under vacuum so nothing will get sucked in.
 

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77
Joined
Dec 16, 2016
Posts
17,566
Reaction score
27,054
To weep or not...

WEEP HOL is available as a custom plate

I am sold. Where do I drill this thing? And at cruise / vacuum won't dirt get sucked in through that hole?

The only thing getting sucked in are the suckers falling for the sasquatch77, snake oil salesman of the millennia, alternate reality.
 

xgardx

Full Access Member
Joined
May 19, 2017
Posts
189
Reaction score
111
Location
CLE OH
pulled the intercooler today to install the TurboSmart BOV, after 2300miles in OH summer weather, and low and behold,

what did I find in the core........




NOT A DROP!!!!



WOW that weep hole mod I did sure is working like a charm, (j/K)
 
Top