Installed 37's on Gen3 35 Raptor - no issues.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

98Craig

Member
Joined
Sep 8, 2021
Posts
49
Reaction score
40
Location
Mansfield, TX
Th
I had zero issues fitting my 37 in the stock spare location fully inflated
Thanks! Other than the spare tire area, and the front bumpstop, sounds like all other comparisons in regards to tires (ie ride, shifting, acceleration) would be the same when comparing a 35 package with 37 tires and a 35 package and a 37 package.
 

pnwobrigade

Full Access Member
Joined
Jun 23, 2021
Posts
175
Reaction score
208
Location
WA
Th

Thanks! Other than the spare tire area, and the front bumpstop, sounds like all other comparisons in regards to tires (ie ride, shifting, acceleration) would be the same when comparing a 35 package with 37 tires and a 35 package and a 37 package.
Yes, 100% which is why a large percentage of people do the upgrade in terms of saving costs. However, the one thing you can't account for is the exclusivity and the potential higher resale of an actual 37PP package due to it's additional rarity. For most not an issue but some that difference is worth the cost of admission. I myself ordered a 37PP but my identical build instead came in as a 35 package because of hold backs so had a take it or leave it choice. Short of the graphics and $5,000 bump stops I have essentially the same truck now.
 

RGVRaptor

Full Access Member
Joined
Apr 19, 2013
Posts
121
Reaction score
86
Location
South Texas
Joined the “37s on Gen 3 35 Raptor Club” today. No lift… yet. Eibach 1” front lift springs going in on Thursday.

Wheels are Method 305 17x8.5 +0 offset. Tires BFG K02 37x12.5.

Initial impression is the tires look strangely skinny. Maybe they need to grow on me. I’ve only owned the truck for 2 weeks and driven 800 miles so any difference in drivability, to me, is unnoticeable.

Will post more pics once springs go on.
 

Attachments

  • 9A2A7D1D-D184-4FD2-AAA3-F317169479FB.jpeg
    9A2A7D1D-D184-4FD2-AAA3-F317169479FB.jpeg
    256.2 KB · Views: 263
  • 2787DA71-1BCF-4903-9EBA-A2F8243517B1.jpeg
    2787DA71-1BCF-4903-9EBA-A2F8243517B1.jpeg
    188 KB · Views: 292
  • 379829B8-C909-4227-B98D-989F45A58C1E.jpeg
    379829B8-C909-4227-B98D-989F45A58C1E.jpeg
    136.4 KB · Views: 296
  • 49E55E89-3E31-4A16-8023-1BA815FF2609.jpeg
    49E55E89-3E31-4A16-8023-1BA815FF2609.jpeg
    271.3 KB · Views: 288
  • 4FDD5A87-DFF2-4188-B580-F0DA1F6E0998.jpeg
    4FDD5A87-DFF2-4188-B580-F0DA1F6E0998.jpeg
    259.1 KB · Views: 258

hyrepower

Full Access Member
Joined
Jun 4, 2014
Posts
788
Reaction score
553
Location
Las Vegas, NV
O
Joined the “37s on Gen 3 35 Raptor Club” today. No lift… yet. Eibach 1” front lift springs going in on Thursday.

Wheels are Method 305 17x8.5 +0 offset. Tires BFG K02 37x12.5.

Initial impression is the tires look strangely skinny. Maybe they need to grow on me. I’ve only owned the truck for 2 weeks and driven 800 miles so any difference in drivability, to me, is unnoticeable.

Will post more pics once springs go on.
ff to a good start, nice truck. You’ll really like the Eibachs, I have them in my truck, but am installing Race Series coilovers on Thursday as I wanted to even put the front and rear ride a bit. The eibachs rode great, but make the front firmer than the rear and it doesn’t feel as balanced as it could if the front were cushier and better dampened.
 

So-Cal-Al-52

I Love Fossil Fuel
Joined
Jan 21, 2022
Posts
731
Reaction score
1,226
Location
San Diego
Joined the “37s on Gen 3 35 Raptor Club” today. No lift… yet. Eibach 1” front lift springs going in on Thursday.

Wheels are Method 305 17x8.5 +0 offset. Tires BFG K02 37x12.5.

Initial impression is the tires look strangely skinny. Maybe they need to grow on me. I’ve only owned the truck for 2 weeks and driven 800 miles so any difference in drivability, to me, is unnoticeable.

Will post more pics once springs go on.
I have had the same thought, I kept my stock 37 KO2's and put Methods on. I love the look and the ride quality but I agree the tires seem kind of skinny. BFG's are known for not being true 37's. If you ran a Toyo or Nitto it would look wider but also be heavier. A nine inch wide wheel might help but hen you get into other rubbing issues potentially. Hopefully the look grows on you, it is a sharp looking truck. Enjoy her!
 

LedFootRaptor

Member
Joined
Dec 19, 2022
Posts
26
Reaction score
27
Location
California
I loved the ride of the C rated KO2’s, but they are way too skinny looking. I switched them out for Nitto Recon Grapplers and they look wayyyyy better


Joined the “37s on Gen 3 35 Raptor Club” today. No lift… yet. Eibach 1” front lift springs going in on Thursday.

Wheels are Method 305 17x8.5 +0 offset. Tires BFG K02 37x12.5.

Initial impression is the tires look strangely skinny. Maybe they need to grow on me. I’ve only owned the truck for 2 weeks and driven 800 miles so any difference in drivability, to me, is unnoticeable.

Will post more pics once springs go on.
 

McCarthy

Full Access Member
Joined
Mar 2, 2023
Posts
108
Reaction score
125
Location
Canada
I went with the 37" BFG's for the C load rating, otherwise I would have went with an AT3W, or Ridge Grappler.
 

riv

Full Access Member
Joined
Mar 11, 2019
Posts
243
Reaction score
120
Location
illinois
O

ff to a good start, nice truck. You’ll really like the Eibachs, I have them in my truck, but am installing Race Series coilovers on Thursday as I wanted to even put the front and rear ride a bit. The eibachs rode great, but make the front firmer than the rear and it doesn’t feel as balanced as it could if the front were cushier and better dampened.
the gen 2 race series?
 
Top