Icon Multi-Rate Rear Leaf Spring Kit

[Aesconde]

Yes it can. But it is also recommended to purchase a better bump pad with the spacer kit. Like this one for instance https://sdhqoffroad.com/collections...ts/17-current-ford-raptor-sdhq-built-bump-pad

I have a sdhq bump pad set for sale if anyone is interested. I’ll post it In the garage sale.


Sent from my iPhone using Tapatalk

 

[CatchMeOffroad]

Few more pics. I’ll likely add 2 full turns to front preload.
43” to front fender
45.25” to rear fender

These pics are with empty bed.

View attachment 115595

View attachment 115598

View attachment 115599

Thanks for the pics and info! Do you offroad a lot? Wondering if your 37s have made contact with your fenders at any time? And if you had to do any trimming?

 

[Mkarban]

I hit the dirt every now and then. Family owns about 500 acres, trails, woods, mud, fields. Mainly hunting land. Hasn’t taken flight though
I did destroy a flare with my KM2s, (bought some new flares off of Tasca), no contact however with the KO2s. Trimmed the plastic a bit, nothing major. Ground down pinch weld slightly as well. I think the Icon UCA helped a tad with added castor. No contact on the rears.

 

[CatchMeOffroad]

I hit the dirt every now and then. Family owns about 500 acres, trails, woods, mud, fields. Mainly hunting land. Hasn’t taken flight though
I did destroy a flare with my KM2s, (bought some new flares off of Tasca), no contact however with the KO2s. Trimmed the plastic a bit, nothing major. Ground down pinch weld slightly as well. I think the Icon UCA helped a tad with added castor. No contact on the rears.

Awesome, I appreciate the feedback! You doing Snoball this year by any chance?

 

[Mkarban]

No Snowball for me this year. I totally forgot about it. I’d love to go sometime though.

 

[K1llD4shN1n3]

No Snowball for me this year. I totally forgot about it. I’d love to go sometime though.

Still liking these icons?


Sent from my iPhone using Tapatalk

 

[Mkarban]

Still liking these icons?


Sent from my iPhone using Tapatalk

Love them. I’m glad I put them on highest lift. They settled about 1/4”. I like the rake a still have and allows me to load the rear without sag. Once I get a chance I think I’ll still add another 2 turns to the front preload to raise a hair more. The ride is smooth. I feel like I can dial the shocks in better or at least notice a difference in the settings more readily. I coated them in Amsoil HDMP as well.

 

[K1llD4shN1n3]

Anyone running these icon leafs with an extended shackle?


Sent from my iPhone using Tapatalk

 

[mmayo]

So I have the Icon leafs, Icon hydraulic bump stop kit, Icon wheels, and Fox 3.0s ordered for the rear....have the fox 3.0s up front already so this should finish her off nicely. Plan is to have the leafs installed w/ Option 2.

Option #1 (as shipped)
+1.00" lift height over stock (unloaded)

Option #2
+20% spring rate over Option #1
+2.25" lift height over stock (unloaded)
+1.00" lift height over stock w/ 400lb constant load

Option #3
+40% spring rate over option #1
+3.00" lift height over stock (unloaded)
+0.50" lift height over stock w/ 850lb constant load

Satin Icon Rebounds and springs FINALLY came in yesterday.
Getting the wheels put on today and the rest of the goodies on when time permits....

 

[mmayo]