Let us know how they compare, it would be nice to add/delete/swap leafs down the road. I've heard the deavers can be pretty squeeky after... well after letting the jack down.
Icon Multi-Rate Rear Leaf Spring Kit
- Thread starter mmayo
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Let us know how they compare, it would be nice to add/delete/swap leafs down the road. I've heard the deavers can be pretty squeeky after... well after letting the jack down.
sobiloff
Active Member
My Deavers don't squeak (yet?). RPG packed them with grease before installing them.
D
Deleted member 12951
Guest
You guys sure it isn't the bushings that are squeaking? Ever heard of bushing grease, get the quality stuff designed for bushings.
murph145
Full Access Member
^ Deaver installed my set themselves.... Hopefully they know what bushing grease is..... haha
Actually I wouldn't be surprised if they didn't lol.... nice guys but they ****** up the install of my leafs by putting the new RPG bump stop plate on backwards (OEM position) I had to pay another shop to flip them around since Deaver would not install my RPG bump stops..... Nice guys but kinda a joke to deal with.
Actually I wouldn't be surprised if they didn't lol.... nice guys but they ****** up the install of my leafs by putting the new RPG bump stop plate on backwards (OEM position) I had to pay another shop to flip them around since Deaver would not install my RPG bump stops..... Nice guys but kinda a joke to deal with.
Have you sold any of these and gotten any feedback?
That's like a week out, if you could call in sick and get them installed sooner, we'd really appreciate the feedback asap!
We would all appreciate some photos and a write up when you are done. Before and after measurements and spring set up you choose would be greatly appreciated as well.
Last edited:
I just installed my set of Icon leafs this week after putting ~40k miles on my Deavers. I would go with Icons hands down over Deaver. I'm running the Fox Factory 3.0's and Icon bumps as well.
Besides Deavers sheer lack of finish quality (spray paint), they just seemed too mushy and “disconnected” compared to the Icons. Also, the Deaver +3 HD’s that I was running didn’t have the weight carrying capacity that they should have. 2-300 lbs in the bed and it sat lower than stock. I ended up putting a 1” block in, and then it was about stock. Icons, same level without a block and without the included extra leaf. We’ll see if it settles out at all.
As far as finish, I don’t think that they’re powder coated. I could be wrong, but they are at least coated with some type of more rubbery undercoating stuff. Time will tell how it holds up. The U-bolts are plated unlike Deavers too. I think Deaver forgets that people live outside sunny California.
The Icon's come with a nice U-bolt centering plate too, so you don't have to bother with trying to remove and drill out the stock one to put on the Deavers (or just choosing to not run them.
On top of everything else, the configurability makes them a total win-win.
Besides Deavers sheer lack of finish quality (spray paint), they just seemed too mushy and “disconnected” compared to the Icons. Also, the Deaver +3 HD’s that I was running didn’t have the weight carrying capacity that they should have. 2-300 lbs in the bed and it sat lower than stock. I ended up putting a 1” block in, and then it was about stock. Icons, same level without a block and without the included extra leaf. We’ll see if it settles out at all.
As far as finish, I don’t think that they’re powder coated. I could be wrong, but they are at least coated with some type of more rubbery undercoating stuff. Time will tell how it holds up. The U-bolts are plated unlike Deavers too. I think Deaver forgets that people live outside sunny California.
The Icon's come with a nice U-bolt centering plate too, so you don't have to bother with trying to remove and drill out the stock one to put on the Deavers (or just choosing to not run them.
On top of everything else, the configurability makes them a total win-win.
Last edited:
How do they ride?
Last edited:
Similar threads
