GEN 2 Has anyone Coyote swapped a Gen 2?

[trophycummins]

I didn't think Ford IDS allowed the code changes needed. I've been told IDS is locked down pretty tight as to what can be changed. Isn't it pretty much "choose from this list of options" and that's it? Can you manually enter Hex values into all of the computer modules with IDS?

And in the end, can you really do it legally in California? Given all the emission requirements? I'm sure you are quite aware of the lawsuit that SCT owners just got hit with.

The IDS is limited to some extent, but I'd be willing to bet we could as-built it as another vehicle to get the bulk done, and Forscan/HPTuners it from there. Our shop has been very successful with retrofits like this. I recently did massaging seats from a platinum F150 into a Raptor, that was a HUGE undertaking.

You could do it 100% Legal in California as long as the engine is one model year newer than the model year of the truck.

Example: a 2017 Raptor with a 2018 F150 5.0 Engine.

 

[OPT PRIME]

Is a swap into a 3.5 GT engine out of the question? Screw the cam phasers.


Sent from my iPhone using Tapatalk

 

[Raptorlicious69]

Looking into swapping my 18' SCREW Raptor with a Coyote with a VMP blower. Has anybody done it yet?

GEN 2 RAPTOR V8 ENGINE SWAP | HyperCar Development

hyperfastcars.com

 

[EricM]

"Starting at $52K." Might as well buy an R unless you are balls deep into suspension mods already...

 

[Badgertits]

I’d rather have a 3.5HO w/ fully forged rotating assembly (shared w/ the GT supercar) than a coyote V8, blower or not

Why not put bigger snails on it instead w/ some cooling/fueling upgrades?

 

[UsedRaptor]

Factory Fives has some kit for F150's

 

[Badgertits]

Factory Fives has some kit for F150'sView attachment 413701

Cuz they know a lot about Baja racing/off-roading lol!?! And I KNOW the company

 

[Zeusmotorworks]

Factory Five Releases a DIY Raptor Eater, the XT-1 for Ford F-150s

More than a bolt-on suspension kit, the $24,990 XT-1 setup turns an F-150 crew cab 4x4 into a tube-frame desert pre-runner.

www.caranddriver.com

 

[buddydog]

Factory 5 kit above looks awesome!

 

[Jakenbake]

Factory Five Releases a DIY Raptor Eater, the XT-1 for Ford F-150s

More than a bolt-on suspension kit, the $24,990 XT-1 setup turns an F-150 crew cab 4x4 into a tube-frame desert pre-runner.

www.caranddriver.com

Interesting kit for sure. Frame swap is an interesting idea. Clever with moving the 26 gallon tank after axle.