H&M racing design long travel kit

[EFTOBIAS]

The brenthel is actually the most reasonably priced, and is in the middle of the above two for install difficulty.

 

[ntm]

What's that about ?

I presume you're taking a jab at advertised travel numbers ?
The brenthel advertises 16", mine was 15.75" bumped and strapped. 100% of that functional.
It's certainly possible to get less travel with the brenthel, or any of the other kits, if you don't take the time to clearance things and strap the cv angles properly.
But that's what I'm getting at here. It's easy to handicap one of these lt kits with a crappy install.

 

[canamds450]

Most prerunners have more travel than a long travelled raptor.



The way to go for ease of install is the sdhq, the h&m is a more well tested kit. The brenthel is actually the most reasonably priced, and is in the middle of the above two for install difficulty.



Like I said, you will end up spending more money getting that h&m on there than you will taking a loss on selling it and doing a different kit.



But, you kind of have a pattern going here. You ask questions and are given answers, but you typically just ignore the answers, and keep asking the same questions over and over.

That's why folks get a bit short tempered with you, myself included.

Yes i have keeping track of your advice since the beginning of this threat, problem is who is going to buy it?
I m willing to negotiate the price, will be loosing money, but not too much option
I know this kit is a hugde pain vs your brenthel that is very easy to install, well beside the upper shock mount that need to be welded.

Hey i know the risk of installation, and the cons of the wide turning radius sucks, but things are done. I m trying to solve it
If i sell it, i know the way to go
If cant sell it, what to do then?
The best is to leave it there intil someone appears


Sent from my iPad using Tapatalk

---------- Post added at 04:57 AM ---------- Previous post was at 04:49 AM ----------

I have to get a lumbar decompression surgery tomorrow as well, it is a 15k surgery too
Got with a pain in my leg and got MRI, had 5 herniated disc L1, l2, l3, l4, l5 a d s1 herniated. L4 need to be decompresed
I have been riding atv, mx, utvs lifting squads jet ski got a hudge pain in the back after i drove the vore truck at las vegas.
Those stuff ended me pretty bad


Sent from my iPad using Tapatalk

 

[ntm]

Yes i have keeping track of your advice since the beginning of this threat, problem is who is going to buy it?
I m willing to negotiate the price, will be loosing money, but not too much option
I know this kit is a hugde pain vs your brenthel that is very easy to install, well beside the upper shock mount that need to be welded.

Hey i know the risk of installation, and the cons of the wide turning radius sucks, but things are done. I m trying to solve it
If i sell it, i know the way to go
If cant sell it, what to do then?
The best is to leave it there intil someone appears


Sent from my iPad using Tapatalk

You'll have to list it here for sale. A buyer will not appear overnight. It could take a couple weeks. You will likely have to take a loss as well as eat the shipping costs.
You can go ahead and price out the costs of importing a welder/tech, but it's going to be expensive.
It would likely be cheaper to sell your truck, buy a new one in the us, have it built with the h&m there, then shipped to you.

 

[canamds450]

You'll have to list it here for sale. A buyer will not appear overnight. It could take a couple weeks. You will likely have to take a loss as well as eat the shipping costs.

You can go ahead and price out the costs of importing a welder/tech, but it's going to be expensive.

It would likely be cheaper to sell your truck, buy a new one in the us, have it built with the h&m there, then shipped to you.

Ok, will keep that in mind until i get in the right lane.
Hahaha i was dying so hard to get that kit done on my truck.
Things happen


Sent from my iPad using Tapatalk

 

[F-22]

you dropped 15k into this already?

cut your losses and just weld that bad bitch on and hope for the best.

its not rocket science.

 

[KaiserM715]

But, you kind of have a pattern going here. You ask questions and are given answers, but you typically just ignore the answers, and keep asking the same questions over and over.
That's why folks get a bit short tempered with you, myself included.

This is not a new phenomenon with him.

 

[Jordan@Apollo-Optics]

If you want to sell it you need to post it in the Garage Sale section. Then you need to post up a boat load of pictures documenting everything you have on hand. Then you'll have to take a bath on it because LT's are not popular due to the work involved and the only way to get somebody to bite will be either they were already looking for an LT, or the deal is so good they say "**** it" and decide to do the hard work in getting it to work on their truck.

On top of all of that, you'll have to arrange shipping. Get it to go through customs and everything involved with that.

 

[canamds450]

If you want to sell it you need to post it in the Garage Sale section. Then you need to post up a boat load of pictures documenting everything you have on hand. Then you'll have to take a bath on it because LT's are not popular due to the work involved and the only way to get somebody to bite will be either they were already looking for an LT, or the deal is so good they say "**** it" and decide to do the hard work in getting it to work on their truck.

On top of all of that, you'll have to arrange shipping. Get it to go through customs and everything involved with that.

It is listed at Gss, clear pics part listing with price and shipping
It is only matter to negotiate and then arrange shipping process with paperwork.
For sure i will have to drop my pants on this one
$7000 of 7200
$6500 of around 6700.
Beside wait time
I m loosing 700 or more.
Then taking care of the shipping to miami, i m talking about 1000 to 1200 or more.




Sent from my iPad using Tapatalk

 

[ntm]

You will likely have to pull those pants down a bit further.