GEN3 Forscan

[RaptorJoe331]

@RaptorJoe331 Traffic Jam assist is just the adaptive cruise control/lane centering we have.

oh okay. Thank you!

 

[Jepper]

Anyone figure out a way through ForScan to change the 'view' when you reverse? Changing it from split view to full rear view and no 360?

 

[cwh]

My auto fold mirrors sporadically work. I’m talking about the setting in the vehicle to autofold when locking/unlocking, NOT forscan. They will work a few times and they stop. Anyone else have this issue?

 

[teamster]

Hey folks! I've got a 2021 and just completed the GlareFree change in Forscan. I haven't checked to ensure that the auto-leveling and "dance" on startup still works, that's my next task tonight [Verified to work as intended!]. I've read through all 117 pages (whew) of this thread to look for the answers to the following questions, so forgive me if I overlooked a post or two.

1. I'd like to make the delay for auto-turn-on for headlights much shorter - ideally closer to 1-3 seconds vs the current 4-5 seconds. This is to say, when I drive into a tunnel or other dark area from a bright area, I want the lights to turn on much more quickly than they do stock. I recall there *used* to be a listing on the Forscan common changes for something like this but can't seem to find it anymore.

2. I'd like to change the turn signal "tap" from three clicks (standard) to at least five (standard if towing) in all circumstances. Again, I could have sworn this used to be in the common changes tab but can't seem to find it anymore.

Thanks to all the hex wizards and witches who have done so much hard work to put the huge corpus here together! It's super useful to see all y'all troubleshooting these issues so I can reverse engineer as best as I can.

 

[Littlefx4]

2. I'd like to change the turn signal "tap" from three clicks (standard) to at least five (standard if towing) in all circumstances. Again, I could have sworn this used to be in the common changes tab but can't seem to find it anymore.

For this one, go to page 1...post # 9 and see values for the lane change signal. I changed mine to 5 as that seems like the sweet spot.

 

[teamster]

For this one, go to page 1...post # 9 and see values for the lane change signal. I changed mine to 5 as that seems like the sweet spot.

Can't believe I missed this one. This must have been where I recalled it from, and couldn't find in search because it's an image.

 

[Derrik]

My auto fold mirrors sporadically work. I’m talking about the setting in the vehicle to autofold when locking/unlocking, NOT forscan. They will work a few times and they stop. Anyone else have this issue?

No solution but my auto fold mirrors worked well before I completed the Forscan walk away lock feature. Now walk away lock works but I am unable to get the auto fold mirrors to work as they did originally. Curious if you heard of any solution to your concern and if you added walk away lock.

 

[DocB]

My auto fold mirrors sporadically work. I’m talking about the setting in the vehicle to autofold when locking/unlocking, NOT forscan. They will work a few times and they stop. Anyone else have this issue?

Yep same in my month old ‘24. Stopped working altogether (randomly) for a few days and now works *most* of the time. No idea why

 

[cwh]

Ive made some changes to mine but no the walk away feature. Hmm.. I did add the double honk feature (this was after I realized the 24's don't have it) so maybe thats messing with it.

 

[shaikhasm]

Here you go:

Enable digital temps for engine & transmission on 12" digital cluster only IPC 720-07-01 xxxx x**x xx-- E5

I'd love one for oil pressure so there's numbers across all four... anyone have that?

Hello,

I did this change but I still only have coolant temp and trans temp at the top. Oil temperature is just a needle without any values below it. Did anyone face a similar issue and got it to work?

This is for MY23

Edit: I found another change in the spreadsheet in 720-07-01 xxxx-xxx4-xx and it should add digital oil temp. Will try it and report back. This didn’t work.