Ford Raptor Forum's "Havoc in the Hills: 2" Official Thread
- Thread starter WorldTour
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
rap67
Full Access Member
All The Way
FRF Addict
rap67
Full Access Member
rap67
Full Access Member
perfect, thanks
All The Way
FRF Addict
only 11 days, 6 hours, 8 minutes, 35 seconds left
Newbie Questions
Looking forward to meeting you all at Havoc. I've never been offroad so I'm really looking to learn from all of you guys. I have been reading the site and answering a lot of questions from previous posts. A couple things I'm looking to better understand,
1. I was planning to remove my tonneau cover as I expected it would not withstand the beating. Having said that, some of the pictures from last year show trucks with them in place. Any thoughts?
2. Does anyone have pictures of the tire in a stock bed using the stock corner hooks? I really don't want to drill holes or invest in bed rack that I won't use. Any pics and part suggestions appreciated.
3. I have a snell 2010 rated helmet from road racing. I was going to use an older snell 2000 rated helmet for a co-pilot. Is that acceptable? Didn't really find the helmet requirements on the site.
4. Lastly, how much do you get thrown around inside the truck with normal belts? I had a devise that hooked on to the stock belt of my car that really locked me in place when on track. I've lost it and I don't remember the name.
Thanks in advance. I hope these haven't been answered a hundred times!
Frank
Looking forward to meeting you all at Havoc. I've never been offroad so I'm really looking to learn from all of you guys. I have been reading the site and answering a lot of questions from previous posts. A couple things I'm looking to better understand,
1. I was planning to remove my tonneau cover as I expected it would not withstand the beating. Having said that, some of the pictures from last year show trucks with them in place. Any thoughts?
2. Does anyone have pictures of the tire in a stock bed using the stock corner hooks? I really don't want to drill holes or invest in bed rack that I won't use. Any pics and part suggestions appreciated.
3. I have a snell 2010 rated helmet from road racing. I was going to use an older snell 2000 rated helmet for a co-pilot. Is that acceptable? Didn't really find the helmet requirements on the site.
4. Lastly, how much do you get thrown around inside the truck with normal belts? I had a devise that hooked on to the stock belt of my car that really locked me in place when on track. I've lost it and I don't remember the name.
Thanks in advance. I hope these haven't been answered a hundred times!
Frank
Mustangraptorkid
Full Access Member
Frank take the cover off if it was me I wouldn't want to take the chance one guy at time attacks kept opening so he removed it
I'll try and find u the link on that tire mount thing but being that you said you never off roaded what I did last year was got a chain put it through the cent of the spare and locked it tight to the ring on the side and than used a ratch stap over that and was fine (dint go that fast last year )
can't help u with the helmets cause I'm not sure
I got thrown around a decent amount but it wasn't to bad but out of boredom I install racing harness they work good (hope this doesn't start the belt roll bar argument )
I'll try and find u the link on that tire mount thing but being that you said you never off roaded what I did last year was got a chain put it through the cent of the spare and locked it tight to the ring on the side and than used a ratch stap over that and was fine (dint go that fast last year )
can't help u with the helmets cause I'm not sure
I got thrown around a decent amount but it wasn't to bad but out of boredom I install racing harness they work good (hope this doesn't start the belt roll bar argument )
Similar threads
