GEN 2 eBay - Mishimoto Intercooler Knock Off

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Aleriionn

Member
Joined
Apr 25, 2023
Posts
24
Reaction score
32
Location
columbus, ohio
Agreed, because mine had two flaws. The first was the condensation drain port on the bottom. The threads were somewhat present, but unfinished. I addressed this easily enough with a 12mm x 1.25 tap (IIRC). The second was the inability to seal at the blowoff valve port. Thant I could not overcome without significant effort. The good part of this story is I lost $0 dollars. The seller communicated well and gave me a full refund moments ago. I shipped it back to them at their cost two days ago. That was fast.

Now to try another, probably from another supplier.
It was worth a try, no doubt. I would try another vendor, as it’s highly likely you’ll encounter other manufacturing defects. Although, the next defect might be less critical and more visual. Keep us updated.
 

ayoustin

Full Access Member
Joined
Jul 31, 2018
Posts
166
Reaction score
259
No offense, but I genuinely don't understand putting bottom of the barrel parts on a $70k+ truck. Maybe it's just me but I take a lot of pride in my truck and would rather spend the extra coin on high quality stuff for it.
 

thatJeepguy

FRF Supporting Member
Supporting Member
Joined
Nov 28, 2021
Posts
2,462
Reaction score
3,650
Location
GA
No offense, but I genuinely don't understand putting bottom of the barrel parts on a $70k+ truck. Maybe it's just me but I take a lot of pride in my truck and would rather spend the extra coin on high quality stuff for it.
Lotta 30k 17’ and 18’ raptor owners out there now as the platform ages so it brings a different “crowd”.

Agreed tho especially considering you can get a CVf titan for cheap! Or catch something on market place!

I got one of the most expensive IC units. And it works really good in keeping ic temps down.
 
OP
OP
Diverdown3

Diverdown3

Full Access Member
Joined
Apr 24, 2024
Posts
120
Reaction score
91
Location
Indiana
Write-up of 2nd intercooler added in post #4 of thread.

Conclusion: I'm done with knock-off intercoolers. Looking for best value, brand name IC. I originally wanted one for the stock location, but may consider the above the bumper model since I'm installing a winch at some point.
 

CVF-Jason

Full Access Member
Joined
Jul 9, 2019
Posts
114
Reaction score
89
Location
South Florida
Will do you one better than the Whipple above:


Larger cooling area (27%), no cold side coupler connection, and condensation plug as well - that's without counting the $100 less + no shipping + taxes.
 
Top