E&G Console Gun Vault

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mbdurham

Full Access Member
Joined
May 10, 2019
Posts
499
Reaction score
517
Location
Georgia
I like that one (Vaultek) since the weapon is at least pointed in the right direction. I've trained for a cross-draw before, but prefer it straight, just seems/feels more intuitive.
Yep me too flipped it on it’s end in the safe. Could have gone in flat without cutting but I like that position better plus it leaves more room in the vault. Also have a magnet mounted on the lower dash above my right leg for quicker access [emoji16]


Sent from my iPhone using Tapatalk Pro
 
Last edited:

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77
Joined
Dec 16, 2016
Posts
17,550
Reaction score
27,025
Also have a magnet mounted on the lower dash above my right leg for quicker access

please, be very careful with this. Magnet mounts will release a Gun in a collision and during aggressive off roading. Additionally there is a high probability of sweeping yourself with this mount position.

whatever you choose to use as a mount, practice deployment with a blue Gun or your unloaded gun to work out the kinks.

I had to deploy a backup Gun from my pocket when one of my duty guns went down. I lit off 4x .357 and lands 4 hits at what we later measured at 40’.

the concussion was like an instant onset migraine.
 

Mbdurham

Full Access Member
Joined
May 10, 2019
Posts
499
Reaction score
517
Location
Georgia
please, be very careful with this. Magnet mounts will release a Gun in a collision and during aggressive off roading. Additionally there is a high probability of sweeping yourself with this mount position.

whatever you choose to use as a mount, practice deployment with a blue Gun or your unloaded gun to work out the kinks.

I had to deploy a backup Gun from my pocket when one of my duty guns went down. I lit off 4x .357 and lands 4 hits at what we later measured at 40’.

the concussion was like an instant onset migraine.
Yep I agree I only put it there when I feel it’s needed for quicker access and the angle I have it at is perfect and practiced [emoji16] I really like my new setup in the console vault however. Much better for quick access than just laying it in there.


Sent from my iPhone using Tapatalk Pro
 
Last edited:

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77
Joined
Dec 16, 2016
Posts
17,550
Reaction score
27,025
Yep I agree I only put it there when I feel it’s needed for quicker access and the angle I have it at is perfect and practiced [emoji16] I really like my new setup in the console vault however. Much better for quick access than just laying it in there.


Sent from my iPhone using Tapatalk Pro

Understood. I just wanted to be sure the point got made. Too many of our “people” give this enough seriousness
 

Johnkn

FRF Addict
Joined
Nov 29, 2018
Posts
1,259
Reaction score
894
Location
LaPlata, MD
Hi, I received my vault today, thanks for the great experience again Nick!

One question, I see earlier posts stating that the included bolts were 1.5” and too short, and to purchase 2” bolts. The bolts that were just included with mine are 1.75” (correctly measured from under the bolt head to the end of the threads). Are these ok, or do I truly need 2” bolts.

Thank you....
 

Nick@Apollo-Optics

Supporting Vendor
Supporting Vendor
Joined
Apr 3, 2011
Posts
7,473
Reaction score
3,124
Location
Houston, TX
Hi, I received my vault today, thanks for the great experience again Nick!

One question, I see earlier posts stating that the included bolts were 1.5” and too short, and to purchase 2” bolts. The bolts that were just included with mine are 1.75” (correctly measured from under the bolt head to the end of the threads). Are these ok, or do I truly need 2” bolts.

Thank you....

You're welcome! Thank you for your patience during the COVID closure at E&G.

The bolts you have are good to go! All of the bolts have been updated in the E&G kits for over a year now! If you have any questions or concerns with installation, please reach out!
 
Top