Definitely needs to be leveled

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

RPG

Supporting Vendor
Supporting Vendor
Joined
Mar 12, 2011
Posts
2,029
Reaction score
2,379
Location
Orange County
Installed a set today.

We wanted to pull the shocks out to ensure fitment and getting good pictures.

This kit doesn't require you to remove the shocks from the vehicle.
ee489056e64d0ac905a626628d9b0922.jpg
f9f2893eeee9fb6137ca9f2cfb2ad4b3.jpg



Sent from my iPhone using Tapatalk

---------- Post added at 08:37 PM ---------- Previous post was at 08:36 PM ----------

Change in vehicle ride height was +1.5"


Sent from my iPhone using Tapatalk
 

BRAPPPP

FRF Addict
Joined
Apr 16, 2012
Posts
1,000
Reaction score
155
Location
San Luis Obispo, Ca
We are not changing any of the chassis pivots, lower control arms, upper control arms or steering knuckles, so geometry is not changed. It would benefit you to use our upper control arms due to the added caster, but not necessary.

---------- Post added at 10:35 AM ---------- Previous post was at 10:30 AM ----------





On Gen 1 we do not mandate an alignment when going from bottom to mid perch. This will be a similar height adjustment. "Top perch" collars for the gen 2 are also coming down the manufacturing pipeline.



You are changing the angle of the CVs which is part of the geometry no ? How do we run these trucks completely leveled without Cv issues like gen 1


Sent from my iPhone using Tapatalk
 

dinoone

Full Access Member
Joined
Feb 10, 2011
Posts
526
Reaction score
266
Awesome so just remove tire, spring compression tool, insert collar and instant 1.5" lift!!!
 

SOAKINRED

Full Access Member
Joined
Mar 3, 2016
Posts
576
Reaction score
251
Location
Orange County CA
Does 1.5" even level out the truck? At the least I would want it to be straight across, would really like it a hair higher in the front.

RPG what do you think?
 

SOAKINRED

Full Access Member
Joined
Mar 3, 2016
Posts
576
Reaction score
251
Location
Orange County CA
1.5"

If you look at the RPG thread created specifically on this new product you will see a picture of the truck and how it sits with it installed

Yes i seen the pics, that's a friends truck, but also seen pics and it looks pitched forward a little too. I asked him for a pic of it sitting on flat ground.
 
Top