GEN 2 Baja Designs S1 Flush Mount Install

[Dustan]

Decided to install a set in my SVC bumper

 

[OffroadAlliance.com]

Decided to install a set in my SVC bumperView attachment 135622

Those look great flushed into that SVC bumper!

 

[Dustan]

Those look great flushed into that SVC bumper!

Thanks, the wiring harness you guys provide makes it a painless install and is good quality.
The thread starter made a good comment on the hole size to make these work. You need to make a 2 1/2” hole. I was a little nervous drilling into my new bumper but I’m happy with the results.

 

[Pure745]

Looks great! Now I know who to call to help me.. I'm in South County

 

[nermol]

Great install. Any thoughts on the work light vs the wide? I am nervous that the S1 is just to bright but wondering if the work light filter diffuses it enough.


Sent from my iPhone using Tapatalk

 

[surfnsocal]

Great install. Any thoughts on the work light vs the wide? I am nervous that the S1 is just to bright but wondering if the work light filter diffuses it enough.


Sent from my iPhone using Tapatalk

This was my concern too. I’m very happy with the work/scene lens...not too bright at all.


Sent from my iPad using Tapatalk

 

[Residual Boulders]

If you want to do the flush mount S1s there are only 3 parts you need

S1 Flush Mount (2 of them): http://www.4x4truckleds.com/baja-designs-s1-led-flush-mount-wide-cornering/
Our Harness: http://www.4x4truckleds.com/crystal...ness-for-2017-ford-raptor-s1-s2-reverse-kits/
Upfitter Connection (to tap into the rear): http://www.4x4truckleds.com/baja-designs-ford-upfitter-wiring-harness-squadron-pro-sport-s2/

how about a connection to tap into the brights? Do you make anything like that? I'd like to have my LED light bar and a couple of the bumper lights connected to brights so if my upfitter switch is on, they just come on when i flip on my brights, off when no brights and off when upfitter switch is off.

 

[4x4TruckLEDs.com]

how about a connection to tap into the brights? Do you make anything like that? I'd like to have my LED light bar and a couple of the bumper lights connected to brights so if my upfitter switch is on, they just come on when i flip on my brights, off when no brights and off when upfitter switch is off.

We originally had our harness doing something similar, but since it required tapping into the BCM wiring we opted to make it easier.

LVJ Motorsports makes a relay panel that has high-beam triggers on whatever relay you like which is the best method.

 

[dboat]

as all have posted, that is a nice, clean install and it appears the lights dont overcome the backup camera. How much for the entire setup?
Dana

 

[OffroadAlliance.com]

as all have posted, that is a nice, clean install and it appears the lights dont overcome the backup camera. How much for the entire setup?
Dana

Our reverse light packages start at $229. We've got quite a few different ones to ensure you're getting exactly what you're looking for. Let us know if we can help! Give us a call or check them out online. 888-466-8991.


Reverse Light Kits: OFFROADALLIANCE.COM