Adding a Relayed Power Distribution Block

[BigDogKona]

I'm looking to hook up multiple sets of lights and accessories and I don't want to overload the upfitter switches/fuses... so I want to hook the upfitter aux wires to a relayed power distribution block that is directly connected to the battery. That way the upfitter switches will just be powering the relays and not the actual lights (or other accessories). I assume people have done this... do any of the aftermarket companies sell kits for this? There are lots of kits for Jeeps, but I haven't found anything for the Raptors.
Thanks,
B

 

[goblues38]

buy 6 relays, 6 fuses (1 each for the size of the accessory) (don't do a single fuse for all 6) some wire, solder, and shrink wrap and go to town.

Years ago (1990) when I worked in car stereo industry, a co worker had a full sized bronco with almost 20 separate relays doing various things. The CICK / CLACKof the relays turning on an off was kind of cool.

 

[PlainJane]

There is one posted for Gen 2
Don't recall who makes it up.
ideally get a 6 fuse 6 relay box and master circuit breaker .
IIRC the pre-made version bolted to the side of the battery holder.

Found it

GEN 2 relay box LVJ motorsports

 

[Drivin2Fst]

https://www.lvjmotorsports.com/product-page/gen-2-relay-upgrade-mod

Keith has a couple of different options available on his site.

 

[Drgonzo3000]

I just picked this up off Amazon and will be wiring it up this weekend. It's a pretty nice quality relay box, included relays, fuses and all the connectors and grommets needed to waterproof it all. Was really surprised when I got it.

https://www.amazon.com/gp/product/B08KHVHLL5/?tag=fordraptorforum-20

 

[Chiefapple]

Get the one from Keith at LVJ Motorsports.

 

[Jakenbake]

I built my own using an Eaton RTMR and a switch panel from crown offroad. There are pictures on here somewhere