WSI, RPG and ICON present: The SnoBall 500

[Squatting Dog]

Its not the switching.. It is when you switch in and out of 4wd you pull whatever contaminants (mud/water/dust) near the vent tubes that are sitting on the frames into the system.


-Greg

 

[RAPTURR]

got my new fog lights installed I'm definitely turning heads now

Sent from my DROID BIONIC using Tapatalk 2

 

[shooterAMG]

got my new fog lights installed I'm definitely turning heads now

Sent from my DROID BIONIC using Tapatalk 2

Which Uplifter did you wire to? I'm thinking of double stick taping some Glow Sticks in and i don't know if the 30Amp circuit is enough.

 

[beemerman]

Its not the switching.. It is when you switch in and out of 4wd you pull whatever contaminants (mud/water/dust) near the vent tubes that are sitting on the frames into the system.


-Greg

do you plan on replacing the hoses from the hubs up. or just add on. there is a hydraulic company here is town that sells braided stainless line. was thinking that would be good to use. do the hoses just plug onto the hubs or is there a fitting. havent looked yet. was thinking about this when i install the rcv axles... jack

 

[RAPTURR]

Which Uplifter did you wire to? I'm thinking of double stick taping some Glow Sticks in and i don't know if the 30Amp circuit is enough.

Had to use the 30 amp. Kept popping fuses
Trick was using single bulbs

Sent from my DROID BIONIC using Tapatalk 2

 

[Squatting Dog]

do you plan on replacing the hoses from the hubs up. or just add on. there is a hydraulic company here is town that sells braided stainless line. was thinking that would be good to use. do the hoses just plug onto the hubs or is there a fitting. havent looked yet. was thinking about this when i install the rcv axles... jack

They have a dual hose going to down spindle to iwe.. I am going to extend and reroute the vacuum vent line that splits off and runs forward on the frame.

-Greg

 

[beemerman]

They have a dual hose going to down spindle to iwe.. I am going to extend and reroute the vacuum vent line that splits off and runs forward on the frame.

-Greg

ok i see. will get a better idea when i do the axle install. these rcv axles are way heavy. dont know what the stock ones weigh but i will bring a scale in when i do and see the difference. jack

 

[Yukon Joe]

do you plan on replacing the hoses from the hubs up. or just add on. there is a hydraulic company here is town that sells braided stainless line. was thinking that would be good to use. do the hoses just plug onto the hubs or is there a fitting. havent looked yet. was thinking about this when i install the rcv axles... jack

Now your thinking...

Yukon Joe

 

[beemerman]

I know Greg was talking about this a while back. Just think its a good idea to get the hoses away from any dirt or moisture. Seems like built in failure. The braided hose would last way longer. Just like braided brake lines. Think I will get a braided line for the rpg steering reservoir also. For the overflow tube. Just have a rubber hose on it now. Just trying to be snowball ready. Just hope there is snow. Jack


Sent from my iPad using Tapatalk HD

 

[Java]

If you bought a Wouxun, I think you're going to need the battery eliminator/cig adapter to make the radio last all day. If I make it up I'll bring a bunch with me, or I can ship them to Kanakry. They will be $18 each.
.

MIne came with a cigarette adapter. If everybody got the same KG-uv6d, it is already there.

Team Java