Winch mount for factory bumber

[FatBuoy]

Don't you guys know the first rule of Bumber club is you can't talk about Bumber club?

Ah, yes. But what's the 2nd rule?

PM me too please

 

[TXCobra]

Nick, I'd like a PM too...loved the lights I got from you, may have to get this too!

 

[Nick@Apollo-Optics]

Hey guys! I'm in the process of redesigning the site so I don't have it all listed up here at this time.

Here's a breakdown of the kit.

First, we need to swap out the intercooler with the ADD/Full-Race upgraded intercooler. This raises the intercooler higher from the factory location to allow room for the winch. We then use a winch plate from SDHQ with 1/4" thick steel. We then are able to fit a Warn VR10-S with some other odds and ends. There is some cutting and trimming required to the truck and to the winch. The kit is priced at $2997.

We also have other options for the kit including black anodization for the intercooler and/or a Warn Wireless Controller for the winch. We also have recovery gear available as well.

If you have additional questions, please PM me.

Sorry for the late replies to everyone, we've been dealing with Hurricane Harvey down here in Houston.

 

[RAPTORZIN]

Hi Nick,

I would appreciate the info as well... 2018 SCREW

 

[Nick@Apollo-Optics]

Hi Nick,



I would appreciate the info as well... 2018 SCREW

PM sent!

 

[TonyD22]

Shoot the info my way as well please.

 

[MattGuyver]

A tad confused on why PM's are required vs. simply posting a link or pdf of the kit but whatever... Please send me info on the kit, not too keen on replacing the front bumper; would like to keep the OEM look and remain stealthy! ;-)

 

[Jmorris]

I am highly interested in this kit. However i have a full race intercooler already so i am curious what the cost will be without the intercooler relocate kit. Also i would want the wireless control system on the winch. Thanks

Hey guys! I'm in the process of redesigning the site so I don't have it all listed up here at this time.

Here's a breakdown of the kit.

First, we need to swap out the intercooler with the ADD/Full-Race upgraded intercooler. This raises the intercooler higher from the factory location to allow room for the winch. We then use a winch plate from SDHQ with 1/4" thick steel. We then are able to fit a Warn VR10-S with some other odds and ends. There is some cutting and trimming required to the truck and to the winch. The kit is priced at $2997.

We also have other options for the kit including black anodization for the intercooler and/or a Warn Wireless Controller for the winch. We also have recovery gear available as well.

If you have additional questions, please PM me.

Sorry for the late replies to everyone, we've been dealing with Hurricane Harvey down here in Houston.

 

[Nick@Apollo-Optics]

I am highly interested in this kit. However i have a full race intercooler already so i am curious what the cost will be without the intercooler relocate kit. Also i would want the wireless control system on the winch. Thanks

Hey Josh, just replied to your email! Thanks!

 

[Guapo]

I’d like info as well...i’m Interested.