Ok I dont want to be left out. How about TN dealers??
Sorry, no current dealer in TN for auto, only marine. I would contact your local Ford dealership and see if there a Ford Racing affiliate.
---------- Post added at 12:17 PM ---------- Previous post was at 12:12 PM ----------
San Diego dealers or failing that, who up in LA?
Got a few to choose from in the LA area:
Eclipse Engineering
12353 E. Whittier Blvd.
Unit B
Whittier, CA 90602
562-696-1209
Muscle Motors Performance
9016 Owensmouth Ave.
Canoga Park, CA 91304
818-341-7223
Galpin Auto Sports
15505 Roscoe Blvd.
Van Nuys, CA 91406
818-922-3800
---------- Post added at 12:29 PM ---------- Previous post was at 12:17 PM ----------
There's more room on the 6.2 and the firewall than the 5.4 on the Lightnings.
And this isn't a 4 liter blower, it's a 2.9.
A rear entry is possible, but would be sacrificing multiple things. Look at the Roush kit, it requires a 60deg bend and 2 90deg bends to get the air into the SC. On the suction side of the SC, there is significant loss from turns, bends, bumps, etc. So yes, with an odd shaped inlet to duct below firewall, there would still be a loss, not to mention the excess heat at the back of the firewall.
Also, with a rear entry, to clear the firewall, the SC has to be slid so forward that the air has to be ducted about 4-6" back to the intercooler core. To do this without much loss requires more height, or sacrifice the IC core size to keep height down. Everyone will soon see that we did not sacrifice on IC size, this is the biggest aftermarket intercooler core of any late model system.
As engine compartments get tighter and more unique, your gonna see more go this route.