What did you do to your Raptor today? (Gen2)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

svt1998gt

FRF Supporting Member
Supporting Member
Joined
Mar 31, 2019
Posts
82
Reaction score
41
Location
The Colony, TX
View attachment 475997View attachment 475998View attachment 475999This is my second time I’ve changed the spark plugs, I’m on an interval of every 15,000 miles. I’m sitting at 23k miles now. Not much difference from the first time I changed them to this go around. I watched Johnny Pythons video, and it helped tremendously, especially the part about blowing out the cylinder, however, I didn’t feel confident to do this after removing the spark plug so I blew out the cylinder before we moving the old spark plug. There was some debris that came up that I’m certain what it ended up in the engine had I not done that! Aside from getting the tools ready and looking at the video, it took me about an hour.

Can you post a link to the video. I am due for a change
 

Sharpie69

Full Access Member
Joined
Oct 22, 2021
Posts
921
Reaction score
780
Location
Boston, Ma
View attachment 475997View attachment 4759989View attachment 475999This is my second time I’ve changed the spark plugs, I’m on an interval of every 15,000 miles. I’m sitting at 23k miles now. Not much difference from the first time I changed them to this go around. I watched Johnny Pythons video, and it helped tremendously, especially the part about blowing out the cylinder, however, I didn’t feel confident to do this after removing the spark plug so I blew out the cylinder before we moving the old spark plug. There was some debris that came up that I’m certain what it ended up in the engine had I not done that! Aside from getting the tools ready and looking at the video, it took me about an hour.

The threaded area looks very dark, I haven't seen anything near that dark, I've changed mine several times.
 

nikhsub1

FRF Addict
Joined
Mar 5, 2017
Posts
4,320
Reaction score
5,024
Location
Los Angeles
View attachment 475997View attachment 475998View attachment 475999This is my second time I’ve changed the spark plugs, I’m on an interval of every 15,000 miles. I’m sitting at 23k miles now. Not much difference from the first time I changed them to this go around. I watched Johnny Pythons video, and it helped tremendously, especially the part about blowing out the cylinder, however, I didn’t feel confident to do this after removing the spark plug so I blew out the cylinder before we moving the old spark plug. There was some debris that came up that I’m certain what it ended up in the engine had I not done that! Aside from getting the tools ready and looking at the video, it took me about an hour.

Looks like either they weren't torqued down enough (loose) or too much anti seize. I don't do anti seize but the last time i changed my plugs they were loose, as in I could take them out by hand. Had rough idle etc.
 

Todd Turbo S

FRF Addict
Joined
Nov 28, 2012
Posts
1,020
Reaction score
1,521
Location
Nor Cal
Looks like either they weren't torqued down enough (loose) or too much anti seize. I don't do anti seize but the last time i changed my plugs they were loose, as in I could take them out by hand. Had rough idle etc.
Mine definitely were not loose, all at one was really hard to remove I used a very small amount of anti-seize
 
Top