What did u do to your raptor today?

[IDI-Charlie]

Ok, I give up. What is the part number for the oil filter spout?

View attachment 399527

https://www.tascaparts.com/oem-part...mbz1mLTE1MCZ5PTIwMTMmdD14bCZlPTMtNWwtdjYtZ2Fz This it?

Believe it is AL3Z-6N634-B

That one looks to be for the 3.5/5.0

 

[Dudebrodude]

Believe it is AL3Z-6N634-B

That one looks to be for the 3.5/5.0

Good catch! Just realized I copied the wrong tab. https://www.tascaparts.com/oem-parts/ford-side-shield-al3z6n634b

 

[Jakenbake]

Believe it is AL3Z-6N634-B

That one looks to be for the 3.5/5.0

Good catch! Just realized I copied the wrong tab. https://www.tascaparts.com/oem-parts/ford-side-shield-al3z6n634b

Good find! Thanks

 

[TomDirt]

The 6r80 is ready to pick up. The flywheel & everything near it looked really good. No rust, absolutely no rear main seal leak, and the starter was clean and dry. All good news.

 

[TomDirt]

I got stupid and tried to unload the 6r80 alone. Did I mention it's listed as 215lbs?Anyway, I dropped the bitch and cracked a piece of the housing; also dented the pan. The neighbor is coming over so I can flip it over and lift it up on a bench to check everything. If I have to, I'll get it welded back on. Option #2 is bolt it up, then JBWeld it in place and send it.

 

[dj30417]

Odd it would only effect 1 cylinder. You could swap coils and see if it moves

Now after a short easy (not ripping and roaring) drive I have misfires on cylinders 1,2, and 4. Any help would be greatly appreciated. This all started after filling up with gas. I’m going to put some water remover (or whatever it’s called) in the tank.

 

[dj30417]

Not how I haul things but different strokes for different folks.

 

[badm0t0rfinger]

Someone scraped my truck up while backing up, which wouldn't be a big deal except I'm planning on doing a cross country trip literally next weekend.

A few scraps on the front bumper and they took out the parking/position light on the passanger side. not hard to fix but still a bummer.

 

[Irregular F150]

Someone scraped my truck up while backing up, which wouldn't be a big deal except I'm planning on doing a cross country trip literally next weekend.

A few scraps on the front bumper and they took out the parking/position light on the passanger side. not hard to fix but still a bummer.

Yeah been there. I was pulling into a parking spot and had someone just start backing up before I was in the spot. I was watching them and trying to hurry. I ended up tapping a concrete plant barrier with the skid plate.(didnt do much a but a small dent thankfully) still pissed me off though.

 

[Irregular F150]

So today ill be taking off the baja sae v1s to swap to v2, and doing a thorough wash for monday when i drop my truck off at our yota branch for them to put all the new suspension parts on