What did u do to your raptor today?

[Chiefapple]

How many miles on the original springs?

95k. Picked it up at 55k. Previous owner was a boat enthusiast so I’m pretty sure it spent a lot of time towing shit.


Sent from my iPhone using Tapatalk

 

[Gary E]

95k. Picked it up at 55k. Previous owner was a boat enthusiast so I’m pretty sure it spent a lot of time towing shit.

2014 with 32K on original springs and tires with 8/32" tread remaining currently sits at 42 3/4", so with new KO2's it would be sitting at 43 1/4". With your Deaver +3 that's +1 1/4" difference which is about right.

 

[Chiefapple]

2014 with 32K on original springs and tires with 8/32" tread remaining currently sits at 42 3/4", so with new KO2's it would be sitting at 43 1/4". With your Deaver +3 that's +1 1/4" difference which is about right.

Right. Except I had a 1” drop shackle also. So it should be at stock. Like I said though. My stock height when I picked it up was 43.5-44.0”. When I measured it last week it was 42.5-43.0”. So I guess it was closer to an inch of sag since I picked it up.


Sent from my iPhone using Tapatalk

 

[Chiefapple]

Any thoughts on how to get this out. Last cylinder on drivers side top.




Sent from my iPhone using Tapatalk

 

[allinon72]

Any thoughts on how to get this out. Last cylinder on drivers side top.




Sent from my iPhone using Tapatalk

I would let some PB Blaster soak in the hole for several hours and use a 5/8" bolt extractor in the kit below. Good news is on that particular plug location, you don't need any swivels so you can get some torque on it. There should be room for a breaker bar if needed.

https://shop.advanceautoparts.com/p...xzb7fP9SAuPfiFaDR8ZJ5Jmc2nojuELxoCUiEQAvD_BwE

 

[Thomas_JohnDoe]

Put the 37’s back on. Found my driver side tie rod was very loose on the Camburg clevis. Disassembled that, used red locite and got it fixed. Cleaned all the grease from the ripped CV boot that was everywhere



And it looks like my front diff is leaking

At least your front housing is not cracked .... with 30K

 

[speedfourfan]

I installed a Corsa xtreme today that I got a great deal on from Rick@freedommotorsports. I have ran several different brands and set ups of other exhausts and I can can say without a doubt this is the best! I should have just went with corsa right away and saved myself a bunch of time and money.

Sent from my SM-N960U using Tapatalk

 

[Deleted member 12951]

At least your front housing is not cracked .... with 30K

View attachment 125266

How in the hell did that happen, its covered by skid plate?

 

[Anthony k]

That needs some tweaking. It should line up with the body line somewhat

I installed a Corsa xtreme today that I got a great deal on from Rick@freedommotorsports. I have ran several different brands and set ups of other exhausts and I can can say without a doubt this is the best! I should have just went with corsa right away and saved myself a bunch of time and money.

Sent from my SM-N960U using Tapatalk

 

[Thomas_JohnDoe]

How in the hell did that happen, its covered by skid plate?

no idea, poor quality... pavement queen, its been discovered by ford dealer during front diff oil change.