Will Gen 3 live valve fit Gen 2 trucks?

[Mystic_2003]

Not sure if this helps at all, as I have Gen2 live valves on a gen2 with EClik.
But the substantial change in gen3 is in the rear, coils instead of springs.
The front seems to do most of the work when I look at the gain on EClik when driving. I can set the rear to 0 gain without much difference.
I also did not revalve my live valves through SDI and its fine

 

[dinocrisis]

That does seem to put me slightly more at ease. The rear is my main concern because of the suspension change in the Gen 3.