VDM Module Replacement - As-Built Values?

[Drivin2Fst]

Sounds like you have the asbuilt data correct now but need to have it calibrated.

Interesting, thank you!


Sent from my iPad using Tapatalk

 

[Tbutkus]

So the ride height sensors can be adjusted with Forscan?

 

[FordTechOne]

So the ride height sensors can be adjusted with Forscan?

There is no adjustment, just the calibration routine. I’m don’t believe that function is available in ForScan, maybe someone else can confirm.

 

[Tbutkus]

There is no adjustment, just the calibration routine. I’m don’t believe that function is available in ForScan, maybe someone else can confirm.

So forscan can’t help recalibration for new springs?

 

[FordTechOne]

So forscan can’t help recalibration for new springs?

Only if it can execute the ride height calibration routine. It basically just programs the voltage of each sensor into the VDM so it knows static ride height.

 

[Drivin2Fst]

So forscan can’t help recalibration for new springs?

From my understanding, no. You can check your ride height in Forscan but can't calibrate. Needs to be done by a separate system.