Turns over, no start. No warning lights, two codes...suggestions??

[StuckOnTheDock]

Drove to a store, did my shopping, came out, admired my truck, got in, she cranked but no start. I looked at fuse 20, but couldn't tell if it was toasted. I didn't have a multi-meter in the truck. I do have a BlueDriver, and it gave me two codes, I'll attach a screen-shot with the info.

After sitting for about an hour, I was fooling around with the security system, thinking it may have glitched and didn't disable the immobilizer. I got in, locked and alarmed it, then put the key in and started it. I was hoping to "reset" the system with the key, as it has the chip. I have NO idea if that was what did it, I doubt it based on the codes.

She's still under dealer warranty, I'm taking her in Friday to get checked out. I'd like to know more about this than their mechanic so I can make sure it's fixed correctly. I appreciate any help in educating me!

Please take a look at the pic, any suggestions are welcome! Thanks!

View media item 15669

 

[The Car Stereo Company]

if its a gen 1, its fuse 27. not fuse 20. gen 2, i couldnt tell you. but that would be a good place to start

 

[CoronaRaptor]

Is that a 2013? And still under warranty? AS Stereo said, it is probably fuse 27 or a problem with the fuel system.

 

[FordTechOne]

Do you have an aftermarket security system, or are you referring to the factory immobilizer (PATS)? If the engine cranks, it’s not PATS related. PATS will not allow the engine to crank if doesn’t recognize the key.

 

[StuckOnTheDock]

Do you have an aftermarket security system, or are you referring to the factory immobilizer (PATS)? If the engine cranks, it’s not PATS related. PATS will not allow the engine to crank if doesn’t recognize the key.

Thanks, factory, so leaning heavily toward fuse 27 or somewhere in that system.

 

[StuckOnTheDock]

if its a gen 1, its fuse 27. not fuse 20. gen 2, i couldnt tell you. but that would be a good place to start

Appreciate the reply. Gen 1, going to check it. I've seen that the damage can be under the fuses, can you tell from above?

 

[The Car Stereo Company]

Appreciate the reply. Gen 1, going to check it. I've seen that the damage can be under the fuses, can you tell from above?

yeah, fuse will be burnt.

 

[StuckOnTheDock]

yeah, fuse will be burnt.

Sure was, going to order the part for the relocation tomorrow if the dealer doesn't.

 

[Louisiana Barefoot]

Fuse relocation kit was about $30 on Amazon and wasn't hard to diy. It was a scary feeling when mine cut out. I was testing the acceleration for the first time on some back roads near my house. It was great until the engine died and a large wrench appeared on my screen. You tube was a large help with several videos. I bought my 2014 Ruby Red Gen 1 Special Edition in January 2021. I'm 66 and it's a social security gift since I now qualify. It won't be used in the swamps down here in La. If y'all tell me how to upload a picture using an android phone, I'll do it.

 

[BenBB]

Fuse relocation kit was about $30 on Amazon and wasn't hard to diy. It was a scary feeling when mine cut out. I was testing the acceleration for the first time on some back roads near my house. It was great until the engine died and a large wrench appeared on my screen. You tube was a large help with several videos. I bought my 2014 Ruby Red Gen 1 Special Edition in January 2021. I'm 66 and it's a social security gift since I now qualify. It won't be used in the swamps down here in La. If y'all tell me how to upload a picture using an android phone, I'll do it.

Nice! From any device, just below the text box there’s three red buttons, the middle one “upload a file”, hit that, find the picture, wait for upload (below the buttons), then either insert as thumbnail or full size (it shows up in the text box wherever the cursor is at). Hope that helps!!