TSB 22-2428 10R60/10R80 Transmission

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

scpete24

Full Access Member
Joined
Jul 28, 2022
Posts
156
Reaction score
123
Location
SoCal
Looks like this TSB was just issued last week regarding the transmissions mentioned in the title. Anyone have additional information on it? All I got was the screenshot below from a buddy but can't find anything online regarding it and hoping to get some more info.

IMG_5294.jpeg
 

thatJeepguy

FRF Supporting Member
Supporting Member
Joined
Nov 28, 2021
Posts
2,462
Reaction score
3,650
Location
GA
For the most part my transmission is butter but every once and a while it has a weird jerky shift… i wonder if this is why..
 

FordTechOne

FRF Supporting Member
Supporting Member
Joined
Jul 29, 2019
Posts
6,664
Reaction score
13,041
Location
Detroit
That is simply an update to a 2 year old TSB.

TSBs are not public for this reason. Everyone who owns an included vehicle believes they have the problem or go looking for the problem. Then they bring it to the dealer wanting the “fix” for a condition they don’t even have.
 
OP
OP
scpete24

scpete24

Full Access Member
Joined
Jul 28, 2022
Posts
156
Reaction score
123
Location
SoCal
That is simply an update to a 2 year old TSB.

TSBs are not public for this reason. Everyone who owns an included vehicle believes they have the problem or go looking for the problem. Then they bring it to the dealer wanting the “fix” for a condition they don’t even have.
Thanks man, just didn’t know. Been having the jerking from P to D and some harsh shifting. Resetting the adaptive tables helps but only for a little while. Was hoping this might have been a perm fix, but doesn’t sound like it.

Another question from your response, is it possible to turn off the adaptive learning altogether and just use the stock tables from ford?
 

sc85fiero

Active Member
Joined
May 2, 2023
Posts
76
Reaction score
245
Location
North Port FL
Is it possible to turn off the adaptive learning altogether and just use the stock tables from ford?
Not to hijack, but yes it is possible to turn off adaptive learning but I wouldn't recommend it. It not only adapts the shift points, line pressures and shift time/lag/flare based on the driver's habits, but it also adapts to normal internal transmission wear and tear. It would probably end up making your clunky shifting worse in the long run.

-Joe
 

FordTechOne

FRF Supporting Member
Supporting Member
Joined
Jul 29, 2019
Posts
6,664
Reaction score
13,041
Location
Detroit
Thanks man, just didn’t know. Been having the jerking from P to D and some harsh shifting. Resetting the adaptive tables helps but only for a little while. Was hoping this might have been a perm fix, but doesn’t sound like it.

Another question from your response, is it possible to turn off the adaptive learning altogether and just use the stock tables from ford?
When the adaptive tables are reset the drive cycle needs to be performed, otherwise it will not relearn properly. The Adaptive learning is only intended to be turned off for diagnostics, not indefinitely.

Here’s the procedure:

 
OP
OP
scpete24

scpete24

Full Access Member
Joined
Jul 28, 2022
Posts
156
Reaction score
123
Location
SoCal
When the adaptive tables are reset the drive cycle needs to be performed, otherwise it will not relearn properly. The Adaptive learning is only intended to be turned off for diagnostics, not indefinitely.

Here’s the procedure:

Awesome appreciate it man!
 
Top