The Best Offset For A Raptor

[Pacific Wheel]

Put together this poll to help wheel mfgr's see what offset most Raptor owners prefer. With offsets getting more and more aggressive it seems like we get more calls for wheels that don't stick out. Please vote, I'll be passing it along to the wheel companies that supply us.

 

[SexyAvalancheGrey]

I chose 0 offset because thats what I went with but I am pondering pushing it out another half an inch with spacers to give a more aggressive look.

In my opinion if wheels aren't at a minimum flush with the wheel well it looks like crap. I have had every car under the sun basically and put wheels on all of them..... Raptor, Porsche, BMW, Audi, Range Rover....etc.

 

[Pacific Wheel]

I chose 0 offset because thats what I went with but I am pondering pushing it out another half an inch with spacers to give a more aggressive look.

In my opinion if wheels aren't at a minimum flush with the wheel well it looks like crap. I have had every car under the sun basically and put wheels on all of them..... Raptor, Porsche, BMW, Audi, Range Rover....etc.

Those +00 should have you out past the fender just a touch

 

[SexyAvalancheGrey]

Yea I knew they poke a little because thats what I run but there are two camps I think out there. The extreme who like those deep dish wheel and tires that are poking out 4-5 inches and the more old school where it is the conservative flush to a tiny poke which gives the truck a new look but extremely classy.

I think on the raptor forum you will find more people are looking for function then just a look.

 

[Robtor310]

0 offset, all the way

Looks the best and no issues with stock 35s on 17s

 

[nick71692]

I run 00 offset but rub at full lock in the front. RRW 17" on stock tires...

 

[Pacific Wheel]

I run 00 offset but rub at full lock in the front. RRW 17" on stock tires...

From our experience the +00 will rub with the stock tire at stock height. 17x8.5 +06 to 17x9 +12 just barely clears.

 

[TXRaptor]

I am using a Fuel Trophy 17x8.5 +06 offset with Toyo RT 37s. (Geisers and Deaver +3s)

I had to trim a 2-3" square of the plastic inner fender on both sides to avoid rubbing, but it is working good, so far. (See first pic)

 

[Pacific Wheel]

I am using a Fuel Trophy 17x8.5 +06 offset with Toyo RT 37s. (Geisers and Deaver +3s)

I had to trim a 2-3" square of the plastic inner fender on both sides to avoid rubbing, but it is working good, so far. (See first pic)

View attachment 114057

View attachment 114055 View attachment 114056

That +06 looks solid!

 

[RaptorGuyNC]

I have a 2018 with factory wheels and want to get this combo:
Method Grid 309 Rims (18x9 +18)
BFG TA/KO2 (LT325 / 65R18)

I have no lift kit or front leveling, do you think that will fit without rubbing?
Anyone else out there with that combo???