Steering wheel shake

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dylanjoseph44

Member
Joined
Aug 24, 2024
Posts
1
Reaction score
0
Location
nashville
2024 Raptor R New wheel and tire setup, and it has been a nightmare to figure out the issue. Had a set of 17” Vossen HFX-1 with 37” Toyo RT trails installed which are all stock size, and the steering has felt loose and shaky at higher speeds. It seemed like a balance issue, but I have taken it to 4 different shops (including the ford dealership) and nobody can figure out the issue. It has been road force balanced numerous times, and they all balance into spec. The wheels/tires themselves are all in spec and not bent or out of round. We put the stock setup on to make sure it wasn’t something with the truck, and no shake at all with stock tires. I really love the new setup and want to see if anyone else out there has had/ knows something and could give some helpful advice? After all the searching for answers I did think maybe an upgraded steering stabilizer could help?
 

Attachments

  • IMG_7484.jpeg
    IMG_7484.jpeg
    209.1 KB · Views: 12
  • IMG_7485.jpeg
    IMG_7485.jpeg
    222.3 KB · Views: 12

HenryThomas

Member
Joined
Dec 19, 2024
Posts
1
Reaction score
0
Location
Mexico
No one else with this same issue?

I have a 24 Raptor R, did the eibach pro lift and drove it for a week before sending it to hennessey to get the velociraptor 1000 package. Wasnt impressed with the springs, nothing compared to when i installed them in my 800hp+ 2023 trx, but didnt noticed the "shake", just awkward stiff front suspension.... in hennessey i chose not to do the bumpers, other esthetic mods and lift since they do 3" lift with spacers on top of the shocks and the guy told me my setup "was better", but added the brembo brake upgrade. Because of that upgrade they did the "upgraded" 20" wheels which are vossens and 37x12.50 bf's all terrain... as soon as i got the truck, without driving it i changed the tires for 37x13.50 nitto recon grapplers, which required minor trimming....

i cant express how dissappointed i am and how much i hate how it handles... front suspension is just so stiff like its stretched all the way, steering wheel shakes a lot, hiting bumps is awful, and when i'm WOT hitting around 100mph truck justs starts to zig zag all around, its impossible to keep it straight...
I was considering doing suspension limit straps but i consider that wont get rid of the steering wheel shake. So i just ordered SDI top hats and some foutz 3/4" rear spacers and will be putting the bf all terrain back hoping this will fix the ride... if not, i'm considering returning to stock brakes so i can do stock wheels/tires... since i didnt do a "1,040hp" upgrade to not be able to drive it above 100mph

Anyone has experienced this and found a reason for this to happen?
 

smurfslayer

Be vewwy, vewwy quiet. We’re hunting sasquatch77
Joined
Dec 16, 2016
Posts
17,706
Reaction score
27,322
are the wheels hub centric or lug centric? You may need an adapter/spacer if they’re not hub centric. I think we had an FRF with a high speed issue, and that’s what it turned out to be.

We put the stock setup on to make sure it wasn’t something with the truck, and no shake at all with stock tires.
THIS. Is what I like to call “clueful information”.

You have a bad combination here and have several choices.
1) continue to blindly dump money into achieving what you want
2) Revert and stop dumping money.

Above are the 2 dividing point options. My bet is on the wheels, even though you said you had the wheels checked for bends or run out.
I did think maybe an upgraded steering stabilizer could help?
NEVER modify a vehicle with a known problem or issue. Troubleshooting the problem will only become more complicated with more variables with each additional change.
 
Top