GEN 1 RPG tierods and Icon coilovers hit

[Raw Horsepower]

Anyone have an issue with aftermarket tierods (I have RPG) hitting bottom coilover plate? The ICON spacers put shock "as far forward away from axle" but it hits the larger diameter tierods. Wonder about size spacers. Thanks.

 

[t_j]

Are the spacers installed in the bottom of the shock the right way around?

 

[Raw Horsepower]

I ended up with duplicate spacers from for shock insert. When I was in middle of install had to shave down and used their note in instructions "as far forward as possible, away from axle" maybe it needs a little more clearance. Going to check with Icon and get correct spacer and try again. Thanks for feedback.
This is the issue of used items missing correct parts.

 

[WarSurfer]

I have ICON coilovers and RPG tie rods and mine are nowhere near that close

 

[bstoner59]

That's pretty tight.


Sent from my iPad using Tapatalk

 

[Deleted member 12951]

I have ICON 3.0's and SDHQ tie rods and no issues. I did with stock tie rods but that was because an unnamed frf vendor installed the spacers incorrectly. You do not need to be shaving the spacers, if you are then something ain't right

 

[Raw Horsepower]

I got two sets of spacers. I needed spacers and adapter slugs. The correct part shipped from Icon yesterday and arriving today. Should be good.

 

[RPG]

Don't hesitate to call the shop. [emoji106]


Sent from my iPhone using Tapatalk