RPG lower link

[Dnpbakon]

But it says when all five links are installed. So is it isolated to just the full kit?

From what I’ve read on different threads and messaging others, it’s only when the full kit is installed

 

[MORaptor1]

But it says when all five links are installed. So is it isolated to just the full kit?

Which is much more money than the little shot of orange we all want to see there.

 

[Bozz]

Which is much more money than the little shot of orange we all want to see there.

 

[taquitos]

Ohhhh I see what’s going on now. The way the links are positioned stock is not a parallel four link with panhard which means the panhard bar over constrains the suspension and bushing flex is relied upon for the suspension to cycle normally. I’m guessing the goal was to distribute side loads to more than just the panhard bar, but who knows. At any rate, any company’s full link kit would do the same thing so it’s not just RPG.

 

[Booth9999]

I saw their latest post today regarding this which was rather interesting because the “fix” was re-welding mounting points to the rear axle.

At that point , say bye to any shred of warranty you had from the transmission back.

Probably a fix, but not a good look.

I’ve had zero issues now after about 500 miles and some offroading. But if they arise these will be for sale and I’ll go the camburg route.

Any updates of noises or?
Does the Camburg setup use different parts in some way?

 

[Dnpbakon]

Any updates of noises or?
Does the Camburg setup use different parts in some way?

No issues whatsoever. 2 off-road trips, and over 2,000 miles. No notable noises or pops. I’m only using the lower links. I think the issue is if younger all 5.

May be selling mine and going back to stock. Though if your interested Pm me

 

[dirtlvr]

I was just looking at mine too lol with no spare you can see all the goodies. The diff cover looks great too! I've been thinking about that as well.

My spare is mounted in my bed so all my goodies are on display.

 

[MajorAR]

My spare is mounted in my bed so all my goodies are on display.

Can you share a pic of how you routed your exhaust or did you leave it stock?

 

[dirtlvr]

That’s stock exhaust.

 

[Waterfowler41]

Add me to the list. I reused the factory hardware. Easier to torque things down with those tab bolts.

I’m dropping a video on my channel covering the install. Super easy, only had to use a jack to let me line up the front bolts a tad better when installing the RPG’s.. Probably could’ve hit it with my purse but I didn’t want to mar up the threads.



Here’s my install, easy peasy!