GEN 2 Revised SDHQ A Pillar Brackets

[dude1782]

This truck is running Rigid Dually XLs on the revised SDHQ a pillar brackets that allow you to run bigger lights on the a pillars without interfering with the antenna. I was able to move my lights inward on the old brackets but that only introduced new problems so I will also be getting the revised brackets. You can see pictures of my install on my build thread through the link in my signature.

These brackets require no drilling and it's an easy install for anyone






Sent from my iPhone using Tapatalk

 

[crash457]

I wonder if the new bracket would allow enough room for a BD XL Pro or XL80?

 

[dude1782]

I wonder if the new bracket would allow enough room for a BD XL Pro or XL80?

It will. I'll be switching mine out when I get my bumper done.


Sent from my 2017 Raptor using Tapatalk

 

[rms8]

You wouldn't happen to have any pics of the brackets and how they attach while you where putting it together, would you?

THX

 

[dude1782]

You wouldn't happen to have any pics of the brackets and how they attach while you where putting it together, would you?

THX

Sorry, I don't. The installation instructions have pictures.

http://sdhqoffroad.com/wp-content/uploads/2016/07/Installation-Instructions-13-1206-G13REV-2.pdf

 

[dude1782]

Pro tip to anyone installing these bad boys: cover up that hole that goes into the fender with some tape or something, you just might save a socket. If you already lost a socket to the fender, the parts guy at my dealership says there's an easy way to get them out. I'll try that this weekend and I'll get pictures of how to do it and what to cover up.

 

[Sitdown]

Amen to the above stmt... Yes jam a rag in there, gotta pop the flares off to get to some of the liner fasteners, but all ears on learning about the easier access

I would have sacrificed a socket, sadly I dropped the hook hinge bolt

 

[dude1782]

Amen to the above stmt... Yes jam a rag in there, gotta pop the flares off to get to some of the liner fasteners, but all ears on learning about the easier access

I would have sacrificed a socket, sadly I dropped the hook hinge bolt

You need to take the wheel off so I'm going to do it when my center caps come in hopefully soon. I'll get pics and post up details to try to make it easy.

 

[Sitdown]

Sounds good, look forward to seeing. I likely need to get these revised ones, my early ones look pretty wankster with XL brackets offset (wanted to keep my antenna in play)

 

[CatchMeOffroad]

It will. I'll be switching mine out when I get my bumper done.


Sent from my 2017 Raptor using Tapatalk

Selling your old ones once you get the new revised ones?