GEN 1 Remove gear shift console cover?

[LOKLOD]

My gear shift seems like it has build up dust, dirt, crumbs, and lord knows what else. It's beginning to stick anytime I shift down towards "M" or a lower gear. I need to take the console cover off to clean it out (hoping that's the only issue). Does anyone have any videos or instructions before I end up causing more damage than I start with? I've searched and so far I have only come up with a generic 2013 f150, not Raptor. Thanks......

Sent from my SM-N950U using Tapatalk

 

[downforce137]

all the floor shifted models are the same, so that video will work for you.

 

[The Car Stereo Company]

My gear shift seems like it has build up dust, dirt, crumbs, and lord knows what else. It's beginning to stick anytime I shift down towards "M" or a lower gear. I need to take the console cover off to clean it out (hoping that's the only issue). Does anyone have any videos or instructions before I end up causing more damage than I start with? I've searched and so far I have only come up with a generic 2013 f150, not Raptor. Thanks......

Sent from my SM-N950U using Tapatalk

http://www.fordraptorforum.com/f170/how-disassemble-your-truck-41787/

you wont need to do some of the steps but it should show you what to do

 

[2014RubyRed]

http://www.fordraptorforum.com/f170/how-disassemble-your-truck-41787/

you wont need to do some of the steps but it should show you what to do

Sent from somewhere in Colorado......

 

[LOKLOD]

Sent from somewhere in Colorado......

Thanks guys. I'll give it a shot this weekend. Looking at the videos, looks like I only need to remove the side panels to access the clips holding the main gear assembly in place.

Sent from my SM-N950U using Tapatalk

 

[Ditchplains1]

LOKLOD,
Watch for a couple of hidden screws. Take your time. I found one screw downburied in the front passenger side....after breaking a cross brace in the back,(hidden under the back of the console). Don't try and force anything and you should be fine.

Eddie