Protecting your Raptor in the Winter from Corrosion

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

911 Crazy

FRF Supporting Member
Supporting Member
Joined
Jul 23, 2019
Posts
7,653
Reaction score
3,136
Location
Maine
No need. My wife already has plans to encase me in my corvette and set it on fire and push it off a cliff.......along with all my other cars.


A modern day Viking funeral.

Corona Raptor would like that......that sicko!
 

911 Crazy

FRF Supporting Member
Supporting Member
Joined
Jul 23, 2019
Posts
7,653
Reaction score
3,136
Location
Maine
If you buy a case off AMSoils site, it’s more than enough to do it. I forgot how many cans are in there exactly but it should be plenty.
I ordered a case yesterday. Thanks


Sent from my iPhone using Tapatalk
 

FGHT ON

Full Access Member
Joined
May 1, 2017
Posts
132
Reaction score
54
I have a few winters on the truck - minimal exposure considering I live in the rust belt b/c I don't drive much and always try to avoid driving when salt is down. I need to get under there and wire brush some areas and POR15 to get it back to my standards, but don't have time before this winter.

If I go ahead and Amsoil MP to prevent more damage this winter, will I be able to remove all the Amsoil MP and properly clean and restore in the Spring?
 

Mister Pinky

Full Access Member
Joined
May 25, 2020
Posts
638
Reaction score
607
Location
OH
I have a few winters on the truck - minimal exposure considering I live in the rust belt b/c I don't drive much and always try to avoid driving when salt is down. I need to get under there and wire brush some areas and POR15 to get it back to my standards, but don't have time before this winter.

If I go ahead and Amsoil MP to prevent more damage this winter, will I be able to remove all the Amsoil MP and properly clean and restore in the Spring?

Not if you want to do a really good job painting it. It does not come off easily. I’d recommend you Woolwax the truck since it stops existing rust.
 

FDHog

Full Access Member
Joined
Jul 10, 2020
Posts
327
Reaction score
329
Location
NJ Shore
No need. My wife already has plans to encase me in my corvette and set it on fire and push it off a cliff.......along with all my other cars.


A modern day Viking funeral.

LOL. Told mine to set me adrift in my boat and set it on fire so my sons in law can't have it.
BTW they're really good guys.
 

Mister Pinky

Full Access Member
Joined
May 25, 2020
Posts
638
Reaction score
607
Location
OH
Instead of POR15?

Yes. I’ve used POR15 extensively in the past and honestly, I’ve been disappointed with it. I’ve had many instances where it flaked off after some time had passed.

If you have some real bad spots, you could wire brush them up and POR15 them, but for overall protection, I recommend yearly coatings of Woolwax applied with shop air.
 
Top