Part # for little splash shields on the inside of headlight housing

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

madeSICC88

Member
Joined
Jun 24, 2020
Posts
49
Reaction score
39
Location
USA
Anybody know what these little flaps are called or part numbers for replacement? I figure they aren't that important but I want to replace the ones on my truck, one is not even there and the other is close to deteriorating. Thanks.

Sent from my SM-G970U using Tapatalk
 
OP
OP
M

madeSICC88

Member
Joined
Jun 24, 2020
Posts
49
Reaction score
39
Location
USA
No, when you open the hood and look at the headlights, there are these rubber type flaps that cover the inside bolt of the headlight housing mounts. Mine are in rough shape and I want to find replacements


Sent from my SM-G970U using Tapatalk
 

wheelman55

Full Access Member
Joined
Feb 4, 2016
Posts
938
Reaction score
505
Location
Big Bend or MN
Anybody know what these little flaps are called or part numbers for replacement? I figure they aren't that important but I want to replace the ones on my truck, one is not even there and the other is close to deteriorating. Thanks.

Sent from my SM-G970U using Tapatalk
Find it here if you can. Call these guys up if you can't find the part. They have access to more exploded views to help find the part.

https://parts.autonationfordwhitebearlake.com/v-2018-ford-f-150--raptor--3-5l-v6-gas
 
OP
OP
M

madeSICC88

Member
Joined
Jun 24, 2020
Posts
49
Reaction score
39
Location
USA
Yea I have looked at a few diagrams but still haven't saw what I was looking for, I will go into the dealer sometime if I can't find it.

Here is the pics of what I'm talking about. On the driver side it's that flap that covers the inside of the headlight, it's missing on the passenger side.2ee1944c413e7d47ff435c24cfe9d55c.jpg420bd6d4bd0009031bc6c291dac95cb6.jpg

Sent from my SM-G970U using Tapatalk
 

WNCHSTR96

Full Access Member
Joined
Nov 21, 2012
Posts
628
Reaction score
1,285
Location
Athens, Alabama
Those are the radiator air dams (I think). I remember there being a thread about remaking them with better rubber or vinyl some where. I’ve had to repair mine several times and don’t recall seeing any part numbers
 

Chinmasterflex

Active Member
Joined
Jan 24, 2017
Posts
89
Reaction score
44
Location
Las Vegas, NV
If you are willing, go make those out of a better material from the hardware store (easier if you have the original). A new oem one will fall apart again in a couple of years. I know some guys have talked about it in the past on here. I thought they were for ducting.
 
Top