Blower Motor Vibrates the cab, Blend Door Broke, DIY fix it

[MurderedOutSVT]

Hey, thanks for not including your feet in Birkenstocks in any of the pics. Hats off to you! Nice write up.

I didn't want @Nex 's fōotfetish to hinder this

 

[GCATX]

I didn't want @Nex 's fōotfetish to hinder this

He's is probably cutting himself right now.

 

[Nex]

I didn't want @Nex 's fōotfetish to hinder this

He's is probably cutting himself right now.

 

[MurderedOutSVT]

He's is probably cutting himself right now.

Yeah I'm going to hell

 

[castine917]

I did a zip tie through some sort of a cross hatch of plastic and around door so I didn't have to worry too much about something else falling down into my fan again. Then eventually I had the door replaced when the dash came out for the clicking actuators and heater core.

 

[Oldfart]

"You can fist your blower hole and feel the blend door in there, it'll rock forward and backward opening the fresh air/recirc mode."

So when you "fist your blower hole", is this a pleasurable sensation? Asking for a friend.

 

[Gumby]

Ok...... I think this might be the problem I have. @MurderedOutSVT Dose it sound like a 747 is flying over the truck? and the dash is about to shake a part? If so......... I know my next project.

 

[MurderedOutSVT]

Ok...... I think this might be the problem I have. @MurderedOutSVT Dose it sound like a 747 is flying over the truck? and the dash is about to shake a part? If so......... I know my next project.

Yep.... thats a good decription.

Its really not a hard fix, but the upside down and backwards act under the dash and the one click at a time ratcheting is what sucks. You can get away without jamming the freshair vent closed, it will work fine